• Kasco WaterGlow lighting kits are intended for use with a Listed control panel having a GFCI protected receptacle, or field wiring terminals and disconnect switch, or a timer with a disconnect for use with a GFCI receptacle. They are intended to be mounted on a floating fountain or aerator for use in a natural or man-made body of water to comply with NEC Article 682.
Back to Contents RGB3C5, RGB6C5 WATERGLOW LIGHTING MANUAL MOUNTING INSTRUCTIONS 1� Attach the bracket (F) to the light fixture (A) by fitting the head of the 10-32 x 1/2’’ hex screw (G) into the tabs on each side of the fixture.
Page 5
Back to Contents RGB3C5, RGB6C5 WATERGLOW LIGHTING MANUAL 3. After attaching the unit to the float according to fountain/aerator instructions, push the clips into recesses on the float until you hear an audible click indicating the fixture is secure. Ensure clip is fully seated on float Fig.
Supplementary hardware is required in order to mount RGBC5 light fixtures to a large (2HP+) surface aerator. Use the additional hard- ware kit (P/N 840303 for 3 light fixtures or 840306 for 6 light fixtures). These kits are sold separately� Contact Kasco Marine at sales@kascomarine�com or your local distributor for order information� 884102 / 2021.1.1...
If the battery is already inserted, remove the plastic battery guard from the remote to active the battery connection. 2� The RGB control box is ready to mount next to your Kasco fountain control box (mount a minimum of 5ft from water) using two exterior-grade wood screws;...
The audio input jack is compatible with the headphone jack on a smartphone, MP3 player, or a pre-amp type output via an “aux” style 3.5mm connection. Do not connect to a line level (amplified speaker) output. Kasco recommends a 3.5mm “Y” adapter to allow for connection of the audio source to the RGB controller and a stereo amplifier simultaneously if desired.
Warranty period: RGB3C5, RGB6C5 = 2 year Limited Warranty: The following maintenance procedures can be utilized to ensure Kasco® Marine, Inc. warrants this Light Kit to be free from de- many years of quality performance from your Kasco fountain and fects in material or workmanship under normal use and service.
This includes tampering with the unit, power cord, and/or control box. Once warranty coverage has been established, the equipment may be sent to any Kasco Authorized Repair Center or to Kasco Kasco Marine Phone: 715-262-4488...
• Kasco C-25, C-85, and C-95 control panels have a photo eye on the left side of the enclosure exterior. This photo eye measures ambient light. To activate, the photo eye must not measure any ambient light for at least several minutes. Covering the photo eye with black electrical tape will activate the photo eye for testing.
RGB3C5, RGB6C5 WATERGLOW LIGHTING MANUAL REPAIR CONTACT FORM • Kasco requires that all equipment sent for repair MUST be accompanied by this form and marked to Repairs attention� • Kasco is NOT responsible for shipping damage accrued in return shipment� •...
Need help?
Do you have a question about the WaterGlow RGB3C5 and is the answer not in the manual?
Questions and answers