THANKS with drop-offs, drastic slopes, or soft bottom mate- We at Kasco Marine, Inc. would like to both thank and rial. congratulate you on your purchase of the Submersible • Do not use a canoe or boat that tips easily during LED Light Kit.
Page 3
• ¼” Stainless Steel Flat Washer (6) provide at least the same submersion to properly cool the ixture. Operating the ixtures out of water will • ¼” Stainless Steel Nut (6) • ¼” x ½” Stainless Steel Bolt (12) damage the LED and void warranty. •...
Page 4
6. Using the cable ties, tie each ixture cord to bottom the ixture. Operating the ixtures out of water will leg of mounting brackets using the holes provided. damage the LED and void warranty. The will act as a strain relief and will keep the cord from being damaged by the fountain and balance the 2.
Instructions For Mounting LED6S19 Instructions for attaching brackets on the loat prior to mounting the light ixtures on 2 HP or larger Kasco 3. Follow the instruction on the previous page units. (LED3S19 Assembly instructions) to mount the light kit to the brackets.
Any required repairs need to be performed by Kasco Ma- Please include the Repair Form received from Kasco rine. Any alterations or changes made to Kasco units by an Marine or your local distributor with the shipment. If no unauthorized source will void the warranty. This includes Repair Form is available, include your name and physical tampering with the unit, power cord, and/or control box.
Page 7
C.O.D. unless otherwise directed. Kasco Marine also accepts Visa and MasterCard credit card payments. Kasco Marine will call for credit card information upon completion of the estimate at the customer’s request. All other warranty and repair inquiries should be directed to Kasco Marine, Inc.
Troubleshooting Tips Troubleshooting tips - light kit The following is provided to help diagnose a probable source of trouble. It is a guideline only and may not show all causes for all problems. For additional troubleshooting help contact your local distributor or visit www.kascomarine.com for additional help. NOTE: you may need to refer to your owners manual that was provided with your fountain for additional control panel settings and adjustments.
ITEM NO. PART NUMBER DESCRIPTION QTY. 451126 SCREW, 1/4-20x1/2" 840537 LOCK WASHER, 1/4" 346065 BRACKET, S.S. LED MOUNTING DO NOT ATTEMPT TO OPEN! CONTACT KASCO MARINE FOR INSTRUCTIONS REGARDING SERVICE OR REPAIR. MODEL LEDxS19-xxx 19 WATT LED LIGHT FIXTURE REPLACEMENT PARTS...
All repairs sent in MUST be accompanied by a copy of this completed sheet! • • Address your Repair to Kasco Marine, Attn: Repairs (or to your Authorized Repair Center. • Shipping to Kasco or an Authorized Repair Center is paid for by the customer.
Page 12
Fill in the information below and keep for your records. Model # (Ex. LED3S19)_______________________________ Serial # (Ex. 2101LEDS3001)____________________________ Purchase Date:_____________________ Purchased From:___________________________________ Registration Date: ___________________________ Kasco Marine, Inc. 800 Deere Rd. Prescott, WI 54021 Phone (715) 262-4488 • Fax (715) 262-4487 www.kascomarine.com • sales@kascomarine.com 884050...