List Of Jumpers; List Of Connectors - Aaeon ETX-700 Instruction Manual

E T X C P U M o d u l e

2.4 List of Jumpers

Jumpers allow users to manually customize system configurations
to their suitable application needs. The following chart consist the
list of each jumper function:
Label Function
JP1 LCD Clock Selection

2.5 List of Connectors

The board has a number of connectors that allow you to configure
your system to suit your application. The table below shows the
function of each board's connectors:
Label Function
CFD1 Compact Flash Disk
J2 PCI / USB / Audio
J3 ISA
VGA / LCD / Video out / COMs / LPT / FDD / IrDA / Mouse
J4
/ Keyboard
J5 IDE 1 / IDE 2 / Miscellaneous
Caution:
In order to properly clear the CMOS when using this ETX module with
ECB-901A, please ensure to turn off the main switch on the power supply
before taking actions. That should include both AT and ATX power supply.
Fail to turn off the main switch of power supply might result in unsuccessful
CLEAR CMOS action.
E T X - 7 0 0 R e v . B
Chapter 2 Quick Installation Guide
2 - 5