Schedule; Chart; Mode 1 ~ 4; Example - Nuvico EVL-400N Instruction Manual

6. SCHEDULE

Schedule setup configures a variety of timed recording settings to provide a fully automated recording
option. Four additional recording groups are available in addition to NORMAL and ALARM recording.
Note: Remember to activate the schedule by pressing the Schedule button on the front panel
after all the values have been entered. If no schedule is entered, the unit will prompt the user
to set the schedule function.

6.1 CHART

The CHART displays the recording schedules configured on the DVR. It breaks down the days of the
week in eight different categories: ALL, SUN, MON, TUE, WED, THU, FRI and SAT.
Sunday through Saturday is the daily schedule of the schedule whereas ALL is for everyday of the
week.

6.2 MODE 1 ~ 4

Schedule recording allows up to four different recording settings to be configured and be used in
combination. The options are the same as RECORD menu.
In order to facilitate the concept of the SCHEDULE recording, the following example is provided as
references to schedule recording in real-life situations.

6.3 EXAMPLE

A store owner needs to record from 10am through 8pm every day of the week using continuous
recording. Additionally, the owner needs to record during his non-business hours using motion
detection to conserve the space on his hard disk drive. The owner wants to record at 30 pictures per
second during his business hours and 10 pictures per second during his non-business hours.
Select ALL from the chart, then press the ENTER button
to access ALL time entry menu.
- 52 -