Table of Contents
Advertisement
3. MOTION
MOTION menu allows customization of motion related options. It includes post motion recording time
settings, motion sensitivity level per camera, and motion grid selection.
3.1.1 RECORD TIME
RECORD TIME determines the amount of the time the DVR records after the initial motion detection.
The user may choose from 10 to 300 seconds in 10 second intervals. If additional motion is detected
during the post record duration, then the counter is reset, and will record for an additional set time of
the RECORD TIME.
3.1.2 CAMERA SELECTION
Select the camera that needs to be modified or adjusted.
3.1.3 SENSITIVITY
Use [–] or [+] button to adjust the motion sensitivity level. The necessary sensitivity can be
immediately determined by observing the green tracking of the movement inside the motion grids as
pictured below. Sensitivity level 1 is the lowest setting and level 20 is the highest setting. The default
sensitivity level is 10.
3.1.4 MOTION GRID
Activate or deactivate each grid by pressing the appropriate numeric button. All active areas have
smaller grid background and all inactive areas have plain background as shown below.
3.1.5 PENCIL
Press the – or + button after highlighting the PENCIL icon to activate all grids at once.
3.1.6 ERASER
Press – or + button after highlighting the ERASER icon to deactivate all grids at once.
- 48 -
Advertisement
Table of Contents
