Max EH-70FII Instruction Manual page 4

● Do not insert foreign substances such as fingers, pens, or wire into this instrument. It
could damage the instrument or cause a fire or an injury.
● Obtain power directly from a single plug socket. Avoid connecting many wires to one
plug socket. It could lead to a fire.
● Do not place any heavy material on a power cord. It could cause damage or a fire.
● Do not connect/disconnect a power plug with a wet hand. It could cause an electric
shock.
● Do not insert your fingers into this instrument. It could cause an injury when the
stapler is abruptly activated.
● Do not splash water or chemicals on the instrument. It could damage the instrument
or cause a fire.
● Keep a staple cartridge on the place where children can not touch it. If children take a
staple, contact a doctor soon.
● Use correct supply voltage. Other voltage level could damage the instrument or
cause a fire or an electronic shock.
● Use only specified AC adapter (AC100-240V, 50-60Hz) appended to the instrument.
● If water gets inside the instrument, disconnect a power plug immediately from a plug
socket and contact your dealer/distributor for a repair. It could damage the instrument
or cause a fire or electric shock.
● Do not operate the instrument, if it is out of order. If it is operated in an out-of-order
state, such as it is smoking, emitting an abnormal sound, or smelling funny, it could
cause a fire or electric shock. Disconnect a power plug immediately from a socket
and contact your dealer/distributor for a repair.
● Disconnect the power cord when replacing the staple cartridge or clearing jammed
staples. It could cause an injury when the stapler is abruptly activated.
● Do not insert the fingers into the stapling area. It could cause an injury.
● Do not touch a motor when replacing a staple cartridge. It is very hot just after
stapling and you could get burned.
● Do not share the electronic outlet with equipment (air conditioner, refrigerator,
microwave, office automation equipment and so on) that requires a large capacity.
The voltage drops and the instrument could malfunction.
● Do not put paper or cloth on the instrument. It could damage the instrument or cause
a fire.
● Do not staple any other paper except PPC paper. It could damage the instrument.
● When the instrument is not used for a long period of time, be sure to disconnect a
power plug from a power socket for safety.
● When moving the instrument, be sure to disconnect a power plug from a power
socket for safety. Or the cord could be broken and cause a fire or electric shock.
WARNING
CAUTION
2