Rear Panel - Sony PDW-U1 Operation Manual

User manual (pdw-u1 professional disc drive unit operation manual for firmware version 2.10 (ed. 2 rev. 1))
Hide thumbs Also See for PDW-U1:
Table of Contents

Advertisement

part, then turn the screw counterclockwise
with a Phillips screwdriver.
For details, see 3-4-5 "To Eject Discs With the Unit
Powered Off" (page 21).
f EJECT button
Ejects a disc (see page 21).
Note
This button is disabled while the disc is
being accessed. Either stop accessing the
disc before ejecting, or eject by an operation
from the computer.
g Disc slot
With the label surface on the right, insert
the disc (see page 21).

2-2 Rear Panel

DC IN 12V
5
a 1 (power) button
Use this button to switch between active
and standby.
b USB connector (Hi-speed USB)
Use the supplied USB cable to connect to
the computer.
Note
If the video and audio are not output on a
computer connected using the USB
connector, try disconnecting the USB cable,
and reconnect making sure it is correctly
inserted.
c DC power inlet connector
Connect to the AC power using the supplied
AC adaptor and a power cord (not
supplied).
d Security slot
You can fit a commercially available
security cable into this slot.
1
2
3
4
2-2 Rear Panel
15

Advertisement

Table of Contents
loading

Table of Contents