Software Requirement
Example of System Setup
To access data on CD-ROM discs, the appropriate device driver and
MSCDEX (supplied with the host adapter) must be installed in your
computer. See the manual that comes with the host adapter for
details.
The application software you need for using the data on a CD-ROM
disc depends on the type and format of the target data. See the
manual supplied with your CD-ROM disc for instructions.
To use the CDU625, at least the following components are
necessary.
• Computer (IBM PC, PC/XT, PC/AT, HP Vectra, or equivalent)
• Host adapter
• Floppy disk drive
• Interface cable (50 pin flat cable)
• Software (Device driver, Utilities)
The following is an example of system setup.
Audio cable
Software
Host computer
Floppy disk
drive
ID No.3
CDU625
Host adapter
ID No.7
Introduction
7