Troubleshooting - Electrolux TWGL3E300 User Manual

CAUTION!
Do not use furniture cleaning
agents or cleaning agents
which can cause corrosion.

11. TROUBLESHOOTING

Problem
The tumble dry‐
er does not op‐
erate.
Unsatisfactory
drying result.
The loading
door does not
close
Possible cause
1)
The tumble dryer is not connec‐
ted to the mains supply.
The door is open.
The On/Off (Ein/Aus) button
was not pushed.
The Start/Pause button was
not touched.
The appliance is in standby
mode.
Incorrect programme selection.
The filter is clogged.
Dryness (Trockengrad) op‐
tion was set to
4)
geltrocken) .
The load was too large.
The airflow slots are clogged.
There is some dirt on the humidi‐
ty sensor in the drum.
The dryness level was not set to
the desired level.
The condenser is clogged.
The filter is not locked into posi‐
tion.
Laundry is trapped between the
door and the seal.
10.7 Cleaning the airflow slots
Use a vacuum cleaner to remove fluff
from the airflow slots.
Connect it to the mains socket.
Check the fuse in the fuse box
(domestic installation).
Close the door.
Push the
button.
Touch the
ton.
Push the
button.
Select a suitable programme.
Clean the filter.
Change
grad) option to a higher level.
iron dry (Bü‐
Do not exceed the maximum
load size.
Clean the airflow slots at the bot‐
tom of the appliance.
Clean the front surface of the
drum.
Adjust the dryness level.
Clean the condenser.
Put the filter in the correct posi‐
tion.
Remove trapped items and close
the door.
ENGLISH
Remedy
On/Off (Ein/Aus)
Start/Pause but‐
On/Off (Ein/Aus)
2)
3)
Dryness (Trocken‐
5)
3)
21