Dial-Up Network Configuration; Create A New Connection - Quectel EC200 Series Application Note

NOTE
In the example above, the settings predefine a PDP context where CID=1, PDP type=IP and
APN=CMNET. CMNET is the APN of the network operator China Mobile and it should be replaced with
the value provided with the value defined by the network operator.

6.2.2. Dial-up Network Configuration

6.2.2.1. Create a New Connection

Open "Control Panel", click "Network and Internet", "Network and Sharing Center" and finally
1.
"Set up a new connection or network", as illustrated below.
EC200x&EC600S&EG912Y_Series_PPP_Application_Note
EC200x&EC600S&EG912Y Series PPP Application Note
Figure 10: Create a New Connection
LTE Standard Module Series
21 / 27