Bluetooth Pairing - Monoprice DT-3BT User Manual

BLUETOOTH PAIRING

Perform the following steps to pair your mobile device with the speakers.
1. Turn the Volume knob on the Primary Speaker Front Panel fully
counterclockwise to the minimum position.
2. Flip the POWER switch on the Primary Speaker Rear Panel to the
ON position.
3. Press the PAIR button on the Primary Speaker Rear Panel. The
Bluetooth LED on the Primary Speaker Front Panel will begin
flashing, indicating that the speaker is in Bluetooth® pairing mode.
4. Open the Bluetooth settings on your mobile device and scan for
nearby Bluetooth devices.
5. Locate and select the MP43240 entry. If prompted for a passcode,
input 0000 (four zeros). Once the connection is established, the
Bluetooth LED on the Primary Speaker Front Panel will cease
flashing and will illuminate steadily, indicating that the Bluetooth
connection has been successfully made.
Note that the speaker will remember the device it was last paired to. To
reconnect after the connection has been broken, open the Bluetooth
settings on your device and select Connect to reestablish the connection.
10