Monoprice 14446 User Manual

Monoprice 14446 User Manual

Deep blue 10 waterproof bluetooth speaker (ipx-6)

Advertisement

14446
Deep Blue 10 Waterproof
Bluetooth Speaker (IPX-6)
User's Manual

Advertisement

Table of Contents
loading

Summary of Contents for Monoprice 14446

  • Page 1 14446 Deep Blue 10 Waterproof Bluetooth Speaker (IPX-6) User’s Manual...
  • Page 2: Safety Warnings And Guidelines

    SAFETY WARNINGS AND GUIDELINES • This speaker is waterproof with an ingress protection rating of IPX6. This means that speaker can withstand the application of "powerful water jets" consisting of a 1/4" stream with a pressure of 30kPa, at a distance of 3 meters, at a rate of 12.5 liters per minute, for 3 minutes.
  • Page 3: Customer Service

    If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am-...
  • Page 4: Package Contents

    PACKAGE CONTENTS Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact Monoprice Customer Service for a replacement. 1x Deep Sea Blue Waterproof 10-Watt Bluetooth Speaker 1x Micro USB charging cable 1x 3.5mm TRS stereo audio cable...
  • Page 5 CHARGING This device contains a rechargeable Lithium-ion battery, which can provide up to 9 hours of audio playback. The battery should be fully charged prior to initial use and at least once every 3 months. Perform the following steps to charge the battery in this speaker. 1.
  • Page 6: Bluetooth Pairing

    BLUETOOTH® PAIRING Perform the following steps to pair this speaker with your Bluetooth® enabled mobile device. 1. Press and hold the Power button for about 3 seconds to power the speaker on. The speaker will emit an ascending series of notes and the LED inside the front grille will start blinking blue, indicating that the speaker is in Bluetooth pairing mode.
  • Page 7: Operation

    OPERATION • Press and hold the Power button for about 3 seconds to power the speaker on or off. • If the speaker is paired with an active device, press and hold the Power button for about 2 seconds to delete the existing pairing and put the speaker in Bluetooth® pairing mode.
  • Page 8: Auxiliary Input

    TECHNICAL SUPPORT Monoprice is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates.
  • Page 9: Specifications

    SPECIFICATIONS Model 14446 Drivers Two 2" drivers Amplifier 5-watts RMS per channel Frequency Response 90Hz ~ 20kHz Bluetooth® Profiles A2DP and AVRCP Bluetooth Range Up to 30 feet Built-in Battery 2200mAh Lithium-ion Full Charge Playback Time Up to 9 hours...
  • Page 10: Regulatory Compliance

    This FCC Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Monoprice, including the use of non-approved antennas, could void the user’s authority to operate this device.

Table of Contents