Installation - Monoprice DT-3BT User Manual

5. POWER: Power switch for turning the speakers on or off.
6. AC INPUT: Unpolarized IEC 60320 C8 input for connecting the
included AC Power Cord.
7. OUTPUT: Speaker interconnect output for connecting the
secondary speaker.

INSTALLATION

Ensure that power is turned off and disconnected on all equipment to be
connected before making any electrical connections.
1. Ensure that the POWER switch on the Primary Speaker is in the OFF
position.
2. Place the Primary Speaker and Secondary Speaker in their intended
locations.
3. Connect one end of the included Speaker Interconnect Cable to
the INPUT connectors on the Secondary Speaker Rear Panel, then
connect the other end to the OUTPUT connectors on the Primary
Speaker Rear Panel.
4. (Optional) Plug one end of the included Stereo RCA Cable into the
BOTTOM INPUT jacks on the Primary Speaker Rear Panel, then plug
the other end into the RCA output jacks on your audio source
device.
5. (Optional) Plug one end of the included 3.5mm Stereo Audio Cable
into the Aux jack on the Primary Speaker Front Panel, then plug the
8