SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. This device is intended for indoor use only. ...
Page 4
Do not expose this device to excessively high temperatures. Do not place it in, on, or near heat sources, such as a fireplace, stove, radiator, etc. Do not leave it in direct sunlight. Prior to operation, check the unit and power cord for physical damage.
If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com during normal business hours (Mon- Fri: 5am-7pm PT, Sat-Sun: 9am-6pm PT) or via email at support@monoprice.com...
PRODUCT OVERVIEW Rear Panel 1. AC INPUT: Input for the AC power cord. The system can accept 100 ~240 VAC, 50/60 Hz input power. 2. POWER: Switch turns power on or off. 3. OPT IN: Digital optical S/PDIF audio input. 4.
6. SUB OUT: RCA jack for connecting an external powered subwoofer. 7. USB POWER: USB port for charging or powering a USB powered device. It has 5 VDC, 2A of charging power. 8. PORT: Bass reflex port. 9. STANDBY/ON: Switch for controlling whether the system will automatically go into standby when no audio input is detected or whether it will remain always on.
13. PAIR: Bluetooth® pairing button. 14. VOLUME -: Press to decrease the volume level. 15. VOLUME +: Press to increase the volume level. 16. SOURCE: Press to cycle through the inputs in the order AUX IN > RCA IN > BLUETOOTH® > OPT IN. The LEDs indicate the selected audio source.
3. Search for nearby Bluetooth® devices on your mobile device. Select the Soundstage 3 entry. Once pairing is complete, the BT source LED will cease flashing and will remain steadily illuminated. The system will remember its pairing and linking status, even after power cycling.
each speaker and a tone sequence will play while the two systems search for each other. 3. Once the two systems are linked the TWS LEDs will cease flashing and will illuminate steadily. You will also hear a confirmation tone from both speakers. If the connection is lost between the two speakers or between the Master speaker and the source device, and they do not reconnect automatically, power cycle both...
SPECIFICATIONS Model 33393 (black), 33394 (white) Amplifier Type Digital class D Amplifier Power 1x 80-watt and 2x 20-watt 1x 5.25" aluminum concave Low Frequency Driver cone woofer High Frequency Driver 2x 1" silk dome tweeters Frequency Response 42 Hz ~ 22 kHz Crossover Frequency 3.0 kHz 3.5mm stereo, RCA stereo,...
TECHNICAL SUPPORT Monoprice is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates.
Page 14
Modifying the equipment without Monoprice’s authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
This FCC Part 15 radio device operates on a non- interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Monoprice, including the use of non-approved antennas, could void the user’s authority to operate this device.
Page 16
this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc. Qualcomm® is a trademark of Qualcomm Incorporated, registered in the United States and other countries.
Need help?
Do you have a question about the Soundstage 3 and is the answer not in the manual?
Questions and answers