Charging; Bluetooth Pairing; True Wireless Stereo (Tws) Mode - Monoprice Harmony XL User Manual

CHARGING

The speaker has a built-in rechargeable battery. To charge the battery, plug one end of
the included micro USB charging cable into the micro USB charging port, then plug the
other end into a USB power source, such as a wall charger. The Charge Level LEDs on
the top panel will flash blue while charging is in progress and all four LEDS will be
illuminated blue when charging is complete. A full charge takes approximately 3-4
hours, if the battery is fully depleted. The battery should be charged before first use and
at least once every three months.

BLUETOOTH PAIRING

Perform the following steps to pair the speaker with a mobile device.
1. With the speaker powered off, press and hold the
speaker will emit audio cues. If it is not already paired with a device, the
Connection Status LED will begin flashing blue. If it is solid blue and you want to
pair with a different device, press and hold the
existing Bluetooth® pairing.
2. Open the Bluetooth settings on your device, then scan for nearby Bluetooth
devices.
3. Locate and select the MP33826 entry. The Connection Status LED will stop
flashing, will illuminate solid blue, and the speaker will emit audio cues.

TRUE WIRELESS STEREO (TWS) MODE

If you have two Harmony XL speakers, you can pair them together in TWS mode. When
in TWS mode, each speaker operates in mono, with one playing left channel audio and
the other playing right channel audio. This allows you to separate the two speakers for
a true stereo listening experience. Note that TWS mode only works with Bluetooth®
audio playback and the speakers must be within 15 feet of each other.
Perform the following steps to pair two Harmony XL speakers for TWS operation.
1. Press and hold the button on each speaker to power both speakers on.
7
button to turn it on. The
button to cancel the