SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. These speakers are intended for indoor use only. ...
If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com or via email at support@monoprice.com. Check the website for support times and links.
3. Connect one end of the included Speaker Interconnect Cable to the Speaker Input Connector on the rear panel of the Slave Speaker, then connect the other end to the Speaker Output Connector on the rear panel of the Master Speaker. 4.
4. Locate and select the DT-5BT entry. If prompted for a passcode, enter 0000 (four zeroes). The LED Bluetooth Indicator will cease flashing, indicating that the Bluetooth connection has been successfully made. Note that once paired with your mobile device, the speakers will remember the pairing.
Modifying the equipment without Monoprice's authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you...
Page 9
This FCC Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Monoprice, including the use of non-approved antennas, could void the user’s authority to operate this device.
Page 10
This IC RSS-210 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Monoprice, including the use of non-approved antennas, could void the user’s authority to operate this device.