Daikin Altherma 3 R F Installer's Reference Manual page 266

6/10
Field settings table
Breadcrumb Field code Setting name
9.B.1 [C-08] External sensor
9.B.2 [2-0B] Ext. amb. sensor offset
9.B.3 [1-0A] Averaging time
└─ Bivalent
9.C.1 [C-02] Bivalent
9.C.2 [7-05] Boiler efficiency
9.C.3 [C-03] Temperature
9.C.4 [C-04] Hysteresis
Installer settings
9.D [C-09] Alarm output
9.E [3-00] Auto restart
9.F [E-08] Power saving function
9.G Disable protections
└─ Overview field settings
9.I [0-00] Leaving water value for high ambient temp. for LWT add zone heating WD curve.
9.I [0-01] Leaving water value for low ambient temp. for LWT add zone heating WD curve.
9.I [0-02] High ambient temp. for LWT add zone heating WD curve.
9.I [0-03] Low ambient temp. for LWT add zone heating WD curve.
9.I [0-04] --
9.I [0-05] --
9.I [0-06] --
9.I [0-07] --
9.I [0-0B] Leaving water value for high ambient temp. for DHW WD curve.
9.I [0-0C] Leaving water value for low ambient temp. for DHW WD curve.
9.I [0-0D] High ambient temp. for DHW WD curve.
9.I [0-0E] Low ambient temp. for DHW WD curve.
9.I [1-00] Low ambient temp. for LWT main zone heating WD curve.
9.I [1-01] High ambient temp. for LWT main zone heating WD curve.
9.I [1-02] Leaving water value for low ambient temp. for LWT main zone heating WD curve.
9.I [1-03] Leaving water value for high ambient temp. for LWT main zone heating WD curve.
9.I [1-04] --
9.I [1-05] --
9.I [1-06] --
9.I [1-07] --
9.I [1-08] --
9.I [1-09] --
9.I [1-0A] What is the averaging time for the outdoor temp?
9.I [1-0B] What is the desired delta T in heating for the main zone?
9.I [1-0C] What is the desired delta T in heating for the additional zone?
9.I [1-0D] --
9.I [1-0E] --
9.I [2-00] When should the disinfection function be executed?
9.I [2-01] Should the disinfection function be executed?
9.I [2-02] When should the disinfection function start?
9.I [2-03] What is the disinfection target temperature?
9.I [2-04] How long must the tank temperature be maintained?
9.I [2-05] Room antifrost temperature
9.I [2-06] Room frost protection
9.I [2-09] Adjust the offset on the measured room temperature
9.I [2-0A] Adjust the offset on the measured room temperature
9.I [2-0B] What is the required offset on the measured outdoor temp.?
4P629095-1B - 2022.05
Range, step
Default value
R/W 0: No
1: Outdoor sensor
2: Room sensor
R/W -5~5°C, step: 0,5°C
0°C
R/W 0: No averaging
1: 12 hours
2: 24 hours
3: 48 hours
4: 72 hours
R/W 0: No
1: Bivalent
R/W 0: Very high
1: High
2: Medium
3: Low
4: Very low
R/W -25~25°C, step: 1°C
0°C
R/W 2~10°C, step 1°C
3°C
R/W 0: Normally open
1: Normally closed
R/W 0: No
1: Yes
R/W 0: Disabled
1: Enabled
R/W 0: No
1: Yes
R/W [9-05]~min(45,[9-06])°C, step: 1°C
35°C
R/W [9-05]~[9-06]°C, step: 1°C
50°C
R/W 10~25°C, step: 1°C
15°C
R/W -40~5°C, step: 1°C
-10°C
8
12
35
20
R/W 35~[6-0E]°C, step: 1°C
55°C
R/W 45~[6-0E]°C, step: 1°C
60°C
R/W 10~25°C, step: 1°C
15°C
R/W -40~5°C, step: 1°C
-10°C
R/W -40~5°C, step: 1°C
-10°C
R/W 10~25°C, step: 1°C
15°C
R/W [9-01]~[9-00], step: 1°C
35°C
R/W [9-01]~min(45, [9-00])°C , step: 1°C
25°C
1
1
20
35
22
18
R/W 0: No averaging
1: 12 hours
2: 24 hours
3: 48 hours
4: 72 hours
R/W 3~10°C, step: 1°C
5°C
R/W 3~10°C, step: 1°C
5°C
5
5
R/W 0: Each day
1: Monday
2: Tuesday
3: Wednesday
4: Thursday
5: Friday
6: Saturday
7: Sunday
R/W 0: No
1: Yes
R/W 0~23 hour, step: 1 hour
1
R/W 60°C
R/W 40~60 min, step: 5 min
40 min
R/W 4~16°C, step: 1°C
12°C
R/W 0: Disabled
1: Enabled
R/W -5~5°C, step: 0,5°C
0°C
R/W -5~5°C, step: 0,5°C
0°C
R/W -5~5°C, step: 0,5°C
0°C
Installer setting at variance with
default value
Date Value
(*1) *3V*
(*2) *6V*
(*3) *9W*