Daikin Altherma 3 R F Installer's Reference Manual page 268

8/10
Field settings table
Breadcrumb Field code Setting name
9.I [6-08] What is the hysteresis to be used in reheat mode?
9.I [6-09] --
9.I [6-0A] What is the desired comfort storage temperature?
9.I [6-0B] What is the desired eco storage temperature?
9.I [6-0C] What is the desired reheat temperature?
9.I [6-0D] What is the desired DHW production type?
9.I [6-0E] What is the maximum temperature setpoint?
9.I [7-00] Domestic hot water booster heater overshoot temperature.
9.I [7-01] Domestic hot water booster heater hysteresis.
9.I [7-02] How many leaving water temperature zones are there?
9.I [7-03] --
9.I [7-04] --
9.I [7-05] Boiler efficiency
9.I [7-06] Compressor forced off
9.I [7-07] BBR16 activation
9.I [8-00] Minimum running time for domestic hot water operation.
9.I [8-01] Maximum running time for domestic hot water operation.
9.I [8-02] Anti-recycling time.
9.I [8-03] Booster heater delay timer.
Additional running time for the maximum running time.
9.I [8-04]
9.I [8-05] Allow modulation of the LWT to control the room temp?
9.I [8-06] Leaving water temperature maximum modulation.
9.I [8-07] --
9.I [8-08] --
9.I [8-09] What is the desired comfort main LWT in heating?
9.I [8-0A] What is the desired eco main LWT in heating?
9.I [8-0B] --
9.I [8-0C] --
9.I [8-0D] --
9.I [9-00] What is the maximum desired LWT for main zone in heating?
9.I [9-01] What is the mimimum desired LWT for main zone in heating?
9.I [9-02] --
9.I [9-03] --
9.I [9-04] Leaving water temperature overshoot temperature.
9.I [9-05] What is the mimimum desired LWT for add. zone in heating?
9.I [9-06] What is the maximum desired LWT for add. zone in heating?
9.I [9-07] --
9.I [9-08] --
9.I [9-09] What is the allowed undershoot in cooling?
9.I [9-0A] Heating comfort setpoint
9.I [9-0C] Room temperature hysteresis.
9.I [9-0D] Pump speed limitation add zone
9.I [9-0E] Pump speed limitation main zone
9.I [C-00] Domestic heating water priority.
9.I [C-01] --
9.I [C-02] Is an external backup heat source connected?
9.I [C-03] Bivalent activation temperature.
9.I [C-04] Bivalent hysteresis temperature.
4P629095-1B - 2022.05
Range, step
Default value
R/W 2~20°C, step: 1°C
10°C
0
R/W 30~[6-0E]°C, step: 1°C
60°C
R/W 30~min(50, [6-0E])°C, step: 1°C
45°C
R/W 30~min(50, [6-0E])°C, step: 1°C
45°C
R/W 0: Reheat only
1: Reheat + sched.
2: Scheduled only
R/W 40~60°C, step: 1°C
60°C
R/W 0~4°C, step: 1°C
0°C
R/W 2~40°C, step: 1°C
2°C
R/W 0: 1 LWT zone
1: 2 LWT zones
2.5
0
R/W
0: Very high
1: High
2: Medium
3: Low
4: Very low
R/W
0: Disabled
1: Enabled
R/W
0: Disabled
1: Enabled
R/W 0~20 min, step 1 min
1 min
R/W 5~95 min, step: 5 min
30 min
R/W 0~10 hour, step: 0,5 hour
0,5 hour
R/W 20~95 min, step: 5 min
50 min
R/W 0~95 min, step: 5 min
95 min
R/W 0: No
1: Yes
R/W 0~10°C, step: 1°C
5°C
18
20
R/W [9-01]~[9-00], step: 1°C
35°C
R/W [9-01]~[9-00], step: 1°C
33°C
13
10
16
R/W [2-0C]=2:
37~65, step: 1°C
55°C
[2-0C]≠2:
37~55, step: 1°C
55°C
R/W 15~37°C, step: 1°C
25°C
22
5
R/W 1~4°C, step: 1°C
1°C
R/W 15~37°C, step: 1°C
25°C
R/W [2-0D]=2:
37~65, step: 1°C
55°C
[2-0D]≠2:
37~55, step: 1°C
55°C
5
22
R/W 1~18°C, step: 1°C
18°C
R/W [3-07]～[3-06]°C, step: 0,5°C
23°C
R/W 1~6°C, step: 0,5°C
1 °C
R/W 0~8, step:1
0: No limitation
1~4: 90~60% pump speed
5~8: 90~60% pump speed during
sampling
6
R/W 0~8, step:1
0: No limitation
1~4: 90~60% pump speed
5~8: 90~60% pump speed during
sampling
6
R/O 1: Heat pump priority
0
R/W 0: No
1: Bivalent
R/W -25~25°C, step: 1°C
0°C
R/W 2~10°C, step 1°C
3°C
Installer setting at variance with
default value
Date Value
(*1) *3V*
(*2) *6V*
(*3) *9W*