Controller Functions; Block Diagram Of Main Menu; Clock Settings - Tech Controllers EU-295 v2 User Manual

VII. CONTROLLER FUNCTIONS
Use touch buttons PLUS, MINUS, EXIT and MENU to navigate through the menu structure. In order to edit a given
parameter, press MENU. Use MENU button to view further options - the icon of the edited parameter is flashing, the
remaining icons are blank. In order to change the settings, use PLUS and MINUS buttons. Once a change has been
introduced, confirm by pressing MENU button (confirm and move on to edit the next parameter) or EXIT button (confirm
and return to the main screen view).
1. BLOCK DIAGRAM OF MAI N MENU
2.

CLOCK SETTINGS

In order to set the time, enter the menu and press MENU button until the
clock settings appear on the screen. Use PLUS and MINUS to set the hour
and minutes. Confirm by pressing MENU button (confirm and move on to
edit the next parameter) or EXIT button (confirm and return to the main
screen view).
Clock settings
Pre-set day temperature
Day from...
Pre-set night temperature
Night from...
Hysteresis
Underfloor heating ON/OFF
Maximum floor temperature
Minimum floor temperature
Underfloor heating hysteresis
9