Underfloor Heating On/Off; Maximum Floor Temperature; Minimum Floor Temperature - Tech Controllers EU-295 v2 User Manual

The room regulator reports that the temperature is too low when the room temperature drops to 22 °C.
In order to set the hysteresis, press MENU until the hysteresis settings appear on the screen.
Use PLUS and MINUS to set the desired hysteresis value. Press MENU to confirm and move on to the next parameter or
press EXIT to confirm and return to the main screen view.
8. UNDERFLOOR HEATING O N/OFF
In order to enable or disable underfloor heating, press MENU until
underfloor heating settings appear on the screen.
To activate the underfloor heating, press PLUS. Confirm by pressing
MENU button (confirm and move on to edit the next parameter) or
EXIT button (confirm and return to the main screen view).
To deactivate the underfloor heating, press MINUS. Confirm by
pressing MENU button (confirm and move on to edit the next
parameter) or EXIT button (confirm and return to the main screen
view).
9. MAXIMUM FLOOR TEMPERAT URE
In order to set the maximum floor temperature, activate the underfloor
heating (section 8) and press MENU until the maximum floor
temperature settings appear on the screen. Use PLUS and MINUS to
set the temperature. Confirm by pressing MENU button (confirm and
move on to edit the next parameter) or EXIT button (confirm and return
to the main screen view).
10.

MINIMUM FLOOR TEMPERATURE

In order to set the minimum floor temperature, activate the underfloor
heating (section 8) and press MENU until the minimum floor
temperature settings appear on the screen. Use PLUS and MINUS to set
the temperature. Confirm by pressing MENU button (confirm and move
on to edit the next parameter) or EXIT button (confirm and return to the
main screen view).
11