Tech Controllers EU-295 v2 User Manual page 8

1. Display
2. EXIT - pressing this button in the main screen view activates day/night mode. After entering the menu, this
button is used to confirm the settings and return to the main screen view.
3. MINUS button – pressing this button in the main screen view activates manual mode and decreases the pre-set
temperature. After entering the menu, this button is used to adjust parameters.
4. PLUS button – pressing this button in the main screen view activates manual mode and increases the pre-set
temperature. After entering the menu, this button is used to adjust parameters.
5. MENU button – hold this button in order to enter the controller menu. While editing parameters press this
button to confirm the changes and move on to edit the next parameter.
NOTE
Press and hold MENU button for 2 seconds to see the floor temperature displayed on the screen. Press MENU
button again to check the battery level. Press the button again to check the software version.
7
1. Current temperature
2. Floor heating active
3. Current time
4. Night mode active
5. Day mode active
6. Manual mode active
7. Heating to pre-set temperature active
5
6
1
4
8
3
2