Table of Contents
Advertisement
Available languages
Available languages
ENG
3.2.4
Cable arrangement for correct installation
Fig. 3.f shows an example of correct cable installation. To ensure correct closing of the IP20/IP44 cover, it is
recommended to use 90° spades for terminals L, N, PE. It is also recommended to fasten the cover closing screw to
a tightening torque of 2 Nm. To facilitate installation in application, special holes are provided on the container for
plastic cable ties to pass through.
Fig. 3.f
Heez +050002745 rel. 1.2 - 16.11.2021
14
Advertisement
Chapters
Table of Contents
