Carel Heez Technical Leaflet page 45

Electronic controller for bottle coolers

Hide thumbs Also See for Heez:

Table of Contents

Available languages

3.22

Driver with IP20 protection

Fig. 3.d shows installation of the IP20 version. Compared to the IP00 version, the cover that closes the compartment

with the visible terminals is required and must be ﬁxed by a screw. For correct arrangement of the cables, scrupulously

follow the instructions under "Cable arrangement for correct installation".

Fig. 3.d

3.2.3

Driver with IP44 protection

Fig. 3.e shows the installation of the IP44 version. Compared to the IP00 version, the cover that closes the compartment

with the visible terminals is required, together with the internal gasket, and must be ﬁxed by a screw. Special gaskets

pre-assembled on the product guarantee the desired protection rating. For correct arrangement of the cables,

scrupulously follow the instructions under "Cable arrangement for correct installation".

guarnizione interna

Fig. 3.e

Heez +050002745 rel. 1.2 - 16.11.2021

pre-assemblata

guarnizione interna sotto

al dissipatore pre-assemblata

ENG

Table of Contents

Chapters

Table of Contents