Pioneer X-NM1 Operating Instructions Manual page 38

9 9 Additional Information Additional Information
Cannot record. Cannot record.
• Check that the cassette still has its erase-protect tabs intact, • Check that the cassette still has its erase-protect tabs intact,
or that they are covered with self-adhesive tape, etc. (p. 36) or that they are covered with self-adhesive tape, etc. (p. 36)
Sound is muffled or previous recording is still Sound is muffled or previous recording is still
audible underneath the new one. audible underneath the new one.
• The tape heads may be dirty. • The tape heads may be dirty.
Clean the tape heads using a head-cleaning cassette or Clean the tape heads using a head-cleaning cassette or
cleaning kit. cleaning kit.
• Check that you're using a Type I (normal) tape. Do not • Check that you're using a Type I (normal) tape. Do not
use Type II (high/C use Type II (high/C
Music search does not work. Music search does not work.
• The spaces between songs may be too short for music • The spaces between songs may be too short for music
search to work (p. 16). search to work (p. 16).
• Make sure that the tape is playing when using music • Make sure that the tape is playing when using music
search—it will not work if the tape is stopped. search—it will not work if the tape is stopped.
Recordings made from the LINE input are Recordings made from the LINE input are
distorted. distorted.
• Set the LINE input level to LINE ATT ON (p. 29). • Set the LINE input level to LINE ATT ON (p. 29).
Recordings made from the LINE input are very Recordings made from the LINE input are very
quiet. quiet.
• Set the LINE input level to LINE ATT OFF (p. 29). • Set the LINE input level to LINE ATT OFF (p. 29).
38 38
En En
O O ) or Type IV (metal) tapes. ) or Type IV (metal) tapes.
r r
2 2
No audio, or audio is distorted. No audio, or audio is distorted.
• Interconnects are not fully inserted into the terminals (or • Interconnects are not fully inserted into the terminals (or
are not connected). are not connected).
Check that all interconnects are firmly inserted. Check that all interconnects are firmly inserted.
• Dirty or oxidized plugs/terminals. • Dirty or oxidized plugs/terminals.
Clean the plugs/terminals. Clean the plugs/terminals.
The remote control doesn't seem to work. The remote control doesn't seem to work.
• The remote control is too far from the player, or the angle • The remote control is too far from the player, or the angle
with the remote sensor is too wide. with the remote sensor is too wide.
Use the remote within its operating range (p. 4). Use the remote within its operating range (p. 4).
• The batteries are exhausted. • The batteries are exhausted.
Put in new batteries (p. 4). Put in new batteries (p. 4).
• The remote control is too close to fluorescent lighting. • The remote control is too close to fluorescent lighting.
Move the remote control out of direct exposure to the Move the remote control out of direct exposure to the
fluorescent light (p. 4). fluorescent light (p. 4).
Timer doesn't work. Timer doesn't work.
• Check that the time has been set (p.13). • Check that the time has been set (p.13).
• Static electricity or other external influences may • Static electricity or other external influences may
cause malfunctioning of this unit. In this case, unplug cause malfunctioning of this unit. In this case, unplug
the power cord and then plug back in. This will usually the power cord and then plug back in. This will usually
reset the unit for proper operation. If this does not reset the unit for proper operation. If this does not
correct the problem, please consult your nearest Pioneer correct the problem, please consult your nearest Pioneer
service center. service center.
• It is possible that this unit will cause interference on • It is possible that this unit will cause interference on
nearby television sets, especially if you're using a TV nearby television sets, especially if you're using a TV
with an indoor antenna. If you experience this problem, with an indoor antenna. If you experience this problem,
either use an outdoor television antenna, or move the either use an outdoor television antenna, or move the
unit away from the television. unit away from the television.