Setting The Reverse Mode; Playing Other Connected Components; Using Sound Modes - Pioneer X-NM1 Operating Instructions Manual

Getting Started Getting Started

Setting the reverse mode

Setting the reverse mode
The tape deck can play both sides of a tape without you The tape deck can play both sides of a tape without you
having to take the cassette out and turning it over by having to take the cassette out and turning it over by
hand. hand.
The reverse mode tells the deck what to do when it The reverse mode tells the deck what to do when it
reaches the end of the tape on the side it's playing. There reaches the end of the tape on the side it's playing. There
are three modes: endless, reverse and one-way. are three modes: endless, reverse and one-way.
1 Press PLAY MODE (remote) repeatedly to 1 Press PLAY MODE (remote) repeatedly to
cycle through the reverse modes. cycle through the reverse modes.
If you're using the front panel, press If you're using the front panel, press
then select then select
PLAY MODE PLAY MODE
displayed option in the menu; press displayed option in the menu; press
Use ∞ and 5 to choose the reverse mode. Use ∞ and 5 to choose the reverse mode.
There are three reverse modes: There are three reverse modes:
• • – Plays one side then stops. – Plays one side then stops.
• • – Stops after the end of the tape has been – Stops after the end of the tape has been
reached in the reverse direction. reached in the reverse direction.
• • – Plays the tape round and round – Plays the tape round and round
continuously. continuously.
In endless mode, the deck will only play the tape In endless mode, the deck will only play the tape
through 16 times before it stops automatically. through 16 times before it stops automatically.
/ /
MENU MENU CLOCK CLOCK
(use 5 and ∞ to change the (use 5 and ∞ to change the
to select). to select).
ENTER ENTER
Playing other connected Playing other connected
components components
You may have connected various other components to You may have connected various other components to
your system. These include a VCR, TV, MD player, your system. These include a VCR, TV, MD player,
another tape, etc. another tape, etc.
1 Press LINE. 1 Press LINE.
2 Start playback on the connected 2 Start playback on the connected
component. component.
You can adjust the sound level using the You can adjust the sound level using the
on the main unit. on the main unit.

Using Sound Modes

Using Sound Modes
Depending on what you are listening to, you may want Depending on what you are listening to, you may want
to change the sound quality to emphasize instruments to change the sound quality to emphasize instruments
or vocals, or to create a live atmosphere. or vocals, or to create a live atmosphere.
• • Press SOUND MODE (remote) repeatedly Press SOUND MODE (remote) repeatedly
to cycle through the Sound Modes. to cycle through the Sound Modes.
The current Sound Mode is displayed, and with each The current Sound Mode is displayed, and with each
press you can select one of the four modes in the press you can select one of the four modes in the
following order: following order:
• • : High and low range sounds are emphasized : High and low range sounds are emphasized
POP POP
• • : Mid-range sounds are emphasized : Mid-range sounds are emphasized
VOCAL VOCAL
• • : The sound is given extra breadth to simulate a : The sound is given extra breadth to simulate a
LIVE LIVE
live performance live performance
• • : No effect on the sound : No effect on the sound
FLAT FLAT
4 4
dial dial
VOLUME VOLUME
17 17
En En