Troubleshooting - Pioneer X-NM1 Operating Instructions Manual

Additional Information Additional Information

Troubleshooting

Troubleshooting
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this
component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components
and electrical appliances being used. If the trouble cannot be rectified after checking the items below, ask your nearest and electrical appliances being used. If the trouble cannot be rectified after checking the items below, ask your nearest
Pioneer authorized service center or your dealer to carry out repair work. Pioneer authorized service center or your dealer to carry out repair work.
The disc is ejected automatically after loading. The disc is ejected automatically after loading.
• Disc not seated properly in the disc guide. • Disc not seated properly in the disc guide.
Align the disc properly. Align the disc properly.
• Condensation inside the player. • Condensation inside the player.
Allow time for condensation to evaporate. Avoid using Allow time for condensation to evaporate. Avoid using
the player near an air-conditioning unit. the player near an air-conditioning unit.
Playback is not possible. Playback is not possible.
• Disc is loaded upside down. • Disc is loaded upside down.
Reload the disc with the label side face up. Reload the disc with the label side face up.
No audio, or audio is distorted. No audio, or audio is distorted.
• Dirt, dust, etc. on the disc. • Dirt, dust, etc. on the disc.
Clean the disc (p. 35). Clean the disc (p. 35).
• The disc is paused. • The disc is paused.
Press 26 to exit the pause mode. Press 26 to exit the pause mode.
• Incorrect system settings. • Incorrect system settings.
Check that the volume is turned up, that the speakers Check that the volume is turned up, that the speakers
are on, the input function set correctly, etc. are on, the input function set correctly, etc.
Auto tuning does not pick up some stations. Auto tuning does not pick up some stations.
• The radio signal is weak. • The radio signal is weak.
Auto tuning will only detect radio stations with a good Auto tuning will only detect radio stations with a good
signal. For more sensitive tuning, connect an outdoor signal. For more sensitive tuning, connect an outdoor
antenna. antenna.
Sound is mono only. Sound is mono only.
• Check that the tuner is not in FM mono mode (p.15). • Check that the tuner is not in FM mono mode (p.15).
Noisy radio reception. Noisy radio reception.
• The frequency is incorrect. • The frequency is incorrect.
Check the radio frequency. Check the radio frequency.
• The radio signal is weak. • The radio signal is weak.
If the radio signal is weak, an outdoor antenna will If the radio signal is weak, an outdoor antenna will
usually give better results than the supplied indoor usually give better results than the supplied indoor
types. types.
• Other electrical equipment is causing interference. • Other electrical equipment is causing interference.
Other electrical equipment, such as TVs, fluorescent Other electrical equipment, such as TVs, fluorescent
lamps and motors can cause interference. lamps and motors can cause interference.
Try switching off or moving the equipment, or moving Try switching off or moving the equipment, or moving
the antenna(s). the antenna(s).
• Antennas are not connected properly. • Antennas are not connected properly.
Check the connections. For FM, make sure that the Check the connections. For FM, make sure that the
antenna is fully extended and positioned to give the antenna is fully extended and positioned to give the
best reception (p. 8). best reception (p. 8).
For AM, make sure that the loop antenna is pointing in For AM, make sure that the loop antenna is pointing in
the best direction (p. 8). the best direction (p. 8).
• The tuning interval is incorrect for your country or region. • The tuning interval is incorrect for your country or region.
Try switching the frequency step (p. 34). Try switching the frequency step (p. 34).
9 9
37 37
En En