Activating/Deactivating The Timers - Pioneer X-NM1 Operating Instructions Manual

Using the timer Using the timer
7 Switch the system into standby mode 7 Switch the system into standby mode
before timer recording starts. before timer recording starts.
The record timer indicator (¶) in the display indicates The record timer indicator (¶) in the display indicates
that the record timer is set. that the record timer is set.
After the recording has finished, the record timer is After the recording has finished, the record timer is
automatically canceled. See the following section, automatically canceled. See the following section,
Activating/deactivating the timers, to cancel before Activating/deactivating the timers, to cancel before
recording, or to recall the timer settings after recording recording, or to recall the timer settings after recording
has finished. has finished.
• If the wake up timer has been set, see the following • If the wake up timer has been set, see the following
section, Activating/deactivating the timers, for section, Activating/deactivating the timers, for
limitations with using the timers concurrently. limitations with using the timers concurrently.
• After setting the timer, playback starts according to • After setting the timer, playback starts according to
the most recent changes to the tape direction. the most recent changes to the tape direction.
• If the AC power is cut (blackout, accidentally • If the AC power is cut (blackout, accidentally
unplugging the power cord), the system will return to unplugging the power cord), the system will return to
the 12:00 clock display and both the timer and clock will the 12:00 clock display and both the timer and clock will
have to be set again for the timer to work. have to be set again for the timer to work.
• The timer won't work if the clock isn't set! • The timer won't work if the clock isn't set!

Activating/deactivating the timers

Activating/deactivating the timers
You might choose to cancel the wake up timer, but keep You might choose to cancel the wake up timer, but keep
the settings for a later time. You can also set the record the settings for a later time. You can also set the record
timer and still keep your wake up timer settings. timer and still keep your wake up timer settings.
1 Switch the system to standby. 1 Switch the system to standby.
2 Press TIMER repeatedly to cycle through 2 Press TIMER repeatedly to cycle through
the timer options. the timer options.
Choose Choose to deactivate all timer settings. To to deactivate all timer settings. To
TIMER OFF TIMER OFF
reset the wake up timer, or the record timer (or both), reset the wake up timer, or the record timer (or both),
select the corresponding select the corresponding
TIMER CHECK TIMER CHECK
TIMER CHECK TIMER CHECK
TIMER CHECK TIMER CHECK
TIMER OFF TIMER OFF
* When the wake up and record timers are both set, * When the wake up and record timers are both set,
make sure the end time of one timer does not overlap make sure the end time of one timer does not overlap
with the start time of the other. Leave at least a minute with the start time of the other. Leave at least a minute
between the two settings (see below). between the two settings (see below).
8:00 8:00 8:30 8:30 8:00 8:00
8:30 8:30 9:00 9:00
option. option.
TIMER CHECK TIMER CHECK
Wake up timer settings Wake up timer settings
( ( indicator is shown) indicator is shown)
Record timer settings Record timer settings
(¶ indicator is shown) (¶ indicator is shown)
Both wake up ( ) and Both wake up ( ) and
record timer (¶) settings * record timer (¶) settings *
Timer set to off Timer set to off
and ¶ disappear) and ¶ disappear)
(both (both
8:30 8:30
8:31 8:31 9:00 9:00
8 8
33 33
En En