11.10 Simulation - Endress+Hauser Liquiline CM442R Operating Instructions Manual

Diagnostics and troubleshooting
Diagnostics/Logbooks
Function
Save logbooks
File format
All data logbooks
Data logbook 1 to n
All event logbooks
Calibration logbook
Diagnostic logbook
Configuration logbook
HW version logbook
Version logbook
The file name is made up of the "Logbook ident" (Menu/Setup/General settings/Logbooks), an abbreviation for
the particular logbook and a time stamp.
1) CSV files use international number formats and separators. Therefore they must be imported into MS Excel as
external data with the correct format settings. If you double-click the file to open it, the data are only displayed
correctly if MS Excel is installed with the US country setting.

11.10 Simulation

You can simulate values at inputs and outputs for testing purposes:
• Current values at current outputs
• Measured values at inputs
Diagnostics/Simulation
Function
Current outputx:y
Simulation
Current
126
Options
Options
• CSV
• FDM
The action commences as
soon as the option is
selected
Options
Options
• On
• Off
Factory setting
Off
2.4 to 23.0 mA
Factory setting
4 mA
Liquiline CM442R/CM444R/CM448R
Info
Save the logbook in the preferred file format.
You can then open the CSV file you saved on the PC in
MS Excel, for example, and process it further
You can import the FDM files into Fieldcare and archive
them so they are tamper-proof.
Use this function to save the logbook to an SD card.
‣
Insert the SD card into the device card reader and
select the logbook to be saved.
Info
Simulation of an output current
This menu appears once for each current output.
If you simulate the value at the current output, this is
indicated on the display by a simulation icon in front of
the current value.
Set the desired simulation value.
1)
.
Endress+Hauser