Table of Contents
Advertisement
Zone Names
The Telephone Access Module can announce the
temperatures and settings of up to 50 zones by
name.
From the Zone menu you can assign a zone name to
each zone in your system, erase all the zone names,
and set the zone announcement to state either the
zone name or the zone number.
By default, each zone is announced as two numbers
(a channel number followed by a zone number) such
as "zone 1 0," "zone 2 4," or "zone 3 1." There may be
from one to four channels connected to your TAM.
Using the Zone menu, you can
assign each zone a name such
as "Dining Room" instead of
"zone 1 4" for example. See
Table 6 on page 32 for a list of
the zone names.
Press 7 from the Main menu to select the Zone menu.
Once you are at the Zone Menu, you hear:
"Zone menu. There are (__) zones in this system.
Press 1 to assign zone names.
Press 2 to erase all zone names.
Press 3 to set zone announcement options.
Press 9 to repeat this menu.
Press * key to return to the main menu".
Use Table 6 on the next page and the instructions
following the table to assign and announce the zones
for your system.
•
To assign zone names, see "Assigning Zone
Names" on page 33.
•
To erase all the zone names, see "Erasing Zone
Names" on page 33.
•
To change the way the zones are announced, see
"Announcing Zones by Name or Number" on
page 33.
31
69-2028—01
Advertisement
Table of Contents
