Honeywell W8735D Owner's Manual page 13

4. Press 4 to change the Heat setpoint temperature
for the current thermostat.
• Enter the setpoint and press the # key.
5. Press 5 to change the Cool setpoint temperature
for the current thermostat.
• Enter the setpoint and press the # key.
To return to the Main menu, press the * key.
2. Changing Global Thermostat Settings
The Global Thermostat Settings sub-menu allows you
to change the system setting and setpoint for all
thermostats at once.
The announcement is: "The current setting for all
zones is (___), press zero to change or # to
continue."
1. Press 0 (zero) to change the current thermo-
stat's system setting (Off, Cool, or Heat).
• Each time you press 0, the setting cycles
between Off, Cool, and Heat.
2. Press the # key to change the setpoint tempera-
ture for the current system setting.
3. Enter the setpoint and press the # key.
To return to the Main menu, press the * key.
3. Current Outdoor Temperature
If available, this selection announces the current
outdoor temperature.
Press the # key to return to the Thermostat menu, or
press the * key to return to the Main menu.
4. Current Indoor Humidity
If available, this selection announces the current
indoor humidity percent.
Press the # key to return to the Thermostat menu, or
press the * key to return to the Main menu.
5. Changing the Temperature Scale
The Temperature scale selection allows you to
change the degree scale to Fahrenheit (ºF) or
Centigrade (ºC).
The announcement is: "Press 1 to indicate all
readings in degrees Fahrenheit. Press 2 to indicate
all readings in degrees Centigrade."
1. Press 1 to use degrees Fahrenheit (º F).
2. Press 2 to use degrees Centigrade (º C).
To return to the Main menu, press the * key.
13 69-2028—01