Service Menu Test; Ervice Enu Est Out - Notifier AFP-2800 Operator's Manual

Page 52
4.3.7.2 4.3.7.2 4.3.7.2 4.3.7.2 S S S S
ERVICE ERVICE ERVICE ERVICE
In this screen a Digital Output may be tested to verify it's ability to operate when required.
DIGITAL OUTPUT TEST MENU
01 OCT 1999 14:44:37
TESTING DIGITAL OUTPUT POINT
POINT STATUS:
SCRIPT PROCESSING PAUSED
TEST BUTTON WILL TOGGLE STATE
ISOL
•
All Script processing is paused while in test mode to provide positive control of the output state. Script
automatically recommence processing when test mode is exited.
•
Test mode will automatically exit after 10 minutes from the last button press to prevent the system remaining
off line.
• If a digital output does not have a control script and is set on during test mode, the output will remain on
permanently until turned off through test mode. This can be a useful function for testing purposes during
commissioning.
Note: As the Dout tests activate the output at the remote module, the module itself is tested as well as the panel to module
communications.
4.3.7.3 4.3.7.3 4.3.7.3 4.3.7.3 S S S S
ERVICE ERVICE
ERVICE ERVICE
This function will run a load test on the batteries for 15 seconds, and if a battery fault is detected, it will be
displayed and logged as such to the history. A successful Battery Test will clear a battery fault. The panel also
performs a short battery integrity test every hour.
Note: The battery test will not run if there is a Mains Fail condition, so as not to further deplete the battery charge.
© N I P
OTIFIER NERTIA TY
www.PDF-Zoo.com
M M M M – T – T – T – T
ENU ENU ENU ENU EST EST EST EST
A = 0
F = 0
I = 0
N = 1
1.2.O3
OFF
TEST BACK
M M M M – T – T – T – T
ENU ENU EST EST
ENU ENU EST EST
L , 2001
TD
firealarmresources.com
AFP-2800 - Fire Indicator Panel – Panel Operation
- D - D - D - D
OUT OUT OUT OUT
Action:
•
An ISOL button is provided so that the point can
be easily isolated during the test period, this button
will toggle to DEISOL if the point is already
isolated.
•
A single press of the TEST button will toggle the
output between On and Off.
•
Pressing the BACK button will return to the
previous screen.
- B - B - B - B
ATTERY ATTERY
ATTERY ATTERY
. . .
WWW INERTIA COM AU