Code Alarm CA-630 Installation Instructions Manual page 16

4. System Power-Up and Programming,
C. Programming Selectable Options
Note: Transmitters must be programmed prior to these steps.
Press to Turn
Feature On/Off
Press to Advance
to Next Option
1. Repeat steps 1-4 of Remote Transmitter Programming
(previous page).
2. Press and release the emergency override button.
The horn or siren will sound four (4) times. This indicates that the
unit has entered the Alarm Options (option bank 1) Bank .
3. Press the FIND/PANIC button to advance to the next feature.
The siren or horn will sound a number of times to indicate the
number of the option.
4. Press the LOCK button to turn the option on or off. The vehicle
status indicator on the dashboard indicates whether an option
is on or off.
• If the selected option is ON, the indicator will light.
• If the selected option is OFF, the indicator will turn off.
• The status indicator will turn on or off when an option is changed.
5. When changes are complete, press and release the emergency
override button to continue to the next option bank. (Siren or horn
will sound five (5) times.)
6. To reset all options back to factory defaults, press the UNLOCK button.
Note: Installer Option bank will never reset.
7. Turn ignition off to exit programming.
See Options Chart on page 18.
16
630.p65 16
cont'd
Press to Restore
Settings to
Factory Default
10/17/03, 7:29 PM