Table of Contents
Advertisement
Protouch2 GUI User Manual
7 Disable Power Management
Power Management should be disabled for the hub after plugging in the hub and
before launching the tool. If it is a USB 3.1 Gen1 Hub, then power management
should be disabled on both USB2.0 Hub and USB 3.1 Gen1 Hub. Power
Management can be disabled by using the Device Manager as shown below.
Please refer to
Appendix II
Uncheck the Checkbox so that the computer will not put the hub to sleep.
2016 Microchip Technology Inc
for more details
Page 7
Advertisement
Table of Contents
Need help?
Do you have a question about the Protouch2 and is the answer not in the manual?