eDecks Step Stringer Handrail Fitting Instructions Manual page 5

Step Stringer Handrail Fitting Instructions
Step 6 Step 6
Drop the first piece of handrail on top of the pre secured spindles. Drop the first piece of handrail on top of the pre secured spindles.
Drive 1 x 50mm screw through the handrail into the spindle. Drive 1 x 50mm screw through the handrail into the spindle.
Drive 1 x 50mm screw through the base rail into the spindle. Drive 1 x 50mm screw through the base rail into the spindle.
Then repeat process for the top spindle. Then repeat process for the top spindle.
B B
D D
Don't forget to check your work with a level as you go! Don't forget to check your work with a level as you go! Don't forget to check your work with a level as you go!
C C
C C
D D
All images are for illustration only, Please see individual item listings for actual item specifications All images are for illustration only, Please see individual item listings for actual item specifications
www.eDecks.co.uk www.eDecks.co.uk
A A
1 x 50mm Screw 1 x 50mm Screw
C C
D D
A A
C C
1 x 50mm Screw 1 x 50mm Screw
Page 5 of 8 Page 5 of 8