eDecks Step Stringer Handrail Fitting Instructions Manual page 4

Step Stringer Handrail Fitting Instructions
Step 5 Step 5
Place 1 angled spindle (D) on top of the base rail and flush against newel post (B), Place 1 angled spindle (D) on top of the base rail and flush against newel post (B),
Secure the spindle to the newel post with 3 x equally spaced 50mm screws. Secure the spindle to the newel post with 3 x equally spaced 50mm screws.
Mirror this by securing another angled spindle flush against newel post (A) Mirror this by securing another angled spindle flush against newel post (A) Mirror this by securing another angled spindle flush against newel post (A)
B B
Don't forget to check your work with a level as you go! Don't forget to check your work with a level as you go!
D D
C C
D D
All images are for illustration only, Please see individual item listings for actual item specifications All images are for illustration only, Please see individual item listings for actual item specifications
www.eDecks.co.uk www.eDecks.co.uk
3 x 50mm Screws 3 x 50mm Screws
A A
3 x 50mm Screws 3 x 50mm Screws
D D
B B
D D
A A
Page 4 of 8 Page 4 of 8