eDecks Step Stringer Handrail Fitting Instructions Manual page 3

Step Stringer Handrail Fitting Instructions
Step 3 Step 3
Secure the base rail in between the newel posts by resting it on top of Secure the base rail in between the newel posts by resting it on top of
the decking, and central to the newel post. Please Note, the recess on the decking, and central to the newel post. Please Note, the recess on
the base rail should be pointing downwards. the base rail should be pointing downwards.
B B
Step 4 Step 4 Step 4
Secure the bottom of the base rail into newel post (A) by driving Secure the bottom of the base rail into newel post (A) by driving
1 x 50mm screw through the underside of the base rail. 1 x 50mm screw through the underside of the base rail.
Repeat the above steps for between the next newel posts, if assembling an 11 or 12 step kit. Repeat the above steps for between the next newel posts, if assembling an 11 or 12 step kit.
Don't forget to check your work with a level as you go! Don't forget to check your work with a level as you go!
Drive 1 x 50mm screw through the top of Drive 1 x 50mm screw through the top of
the base rail into the newel post (B). the base rail into the newel post (B).
C C
All images are for illustration only, Please see individual item listings for actual item specifications All images are for illustration only, Please see individual item listings for actual item specifications
www.eDecks.co.uk www.eDecks.co.uk
A A
underside of the base rail into the newel underside of the base rail into the newel
B B
1 x 50mm Screw 1 x 50mm Screw
A A
1 x 50mm Screw 1 x 50mm Screw
Drive 1 x 50mm screw through the Drive 1 x 50mm screw through the
post (A). post (A).
Page 3 of 8 Page 3 of 8