Advertisement
Modern Deck Fitting Instructions
M
a level of sophistication to any outdoor project.
Its simple and easy to install.
M
Deck is manufactured to precise tolerances. he space between the glass panels
should be no more than 95mm.
Fixing the Newel post
The Maximum width between newel post for the
M
maximum
the post (anything shorter than this you
will need to cut to size).
First we are going to assemble the newel base
connector and the support bar.
Take the long threaded bolt from the metal post
and thread it through the centre hole of the base
connector and screw the supplied nut from
underneath this is to lock the rod into place.
See Fig 1
You now need to s cure the base connector to
either your timber base or concrete base (here you
If you are drilling into wood we would also suggest
Once you have done this then your decking should
look like Fig 3
Dont forget to check your work with a level as you go!
is a contemporary range of decking p oducts designed to inspire.
is 1813mm, this is due to the
Fig 2
All images are for illustration only, Please see individual item listings for actual item specifications
www.eDecks.co.uk
Fig 1
Fig 2
Fig 3
Page 1 of 5
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for eDecks Modern Deck
Summary of Contents for eDecks Modern Deck
- Page 1 Modern Deck Fitting Instructions is a contemporary range of decking p oducts designed to inspire. a level of sophistication to any outdoor project. Its simple and easy to install. Deck is manufactured to precise tolerances. he space between the glass panels should be no more than 95mm.
- Page 2 Modern Deck Fitting Instructions Fixing the baserail careful not to damage any pieces (remember metal can scratch). Take out your handrail brackets from their box and the bag of screws before you attach these to the hand rail you will need to measure and mark the height the baserail should sit, this height should be...
- Page 3 Modern Deck Fitting Instructions Fixing the baserail and newels to the decking Once you have your baserail connected to your newel posts you can slide them as a unit over the threaded metal polls that you have already secured to your decking/patio (making sure that you have the baserail to the bottom) ensure that both newel posts sit perfectly within the newel post bases.
- Page 4 Modern Deck Fitting Instructions Once you have all your glass in place it should look like this. See Fig 8 Fixing the handrail Slide the connectors over the ends of the handrail (you will only be able to put this on one way) take two Fig 8 connector to the handrail.
- Page 5 Modern Deck Fitting Instructions cut and your deck should look like this. See Fig 11 Repeat these step if you are adding further sides and however you will only be able to attach one end off metal newel post that is in position.
Need help?
Do you have a question about the Modern Deck and is the answer not in the manual?
Questions and answers