Table of Contents
Advertisement
Step 3 Select LAN Choice.
Debug Interface: Used to debug the recorder.
Front Interface: Used to connect network cameras.
Do not set the debug and rear net to the same network segment. Otherwise, it will lead to conflict.
Step 4 Enter network parameters: IPv4 Address, IPv4 Subnet Mask, and IPv4 Default Gateway.
Step 5 Optional: To access the recorder via internet, configure DNS server.
Step 6 Click Save.
Go to Configuration > Network > Basic Settings > Port to set the following parameters.
HTTP Port
To access the recorder via web browser.
RTSP Port
To get stream.
Mobile Video Recorder User Manual
Figure 4-2 Configure Local Network
13
Advertisement
Table of Contents
