Set Local Network - HIKVISION AE-MD5043 User Manual

Mobile video recorder

Hide thumbs Also See for AE-MD5043:

Table of Contents

Configure Wi-Fi parameters to connect the device to the network via Wi-Fi.

Step 1 Go to Configuration > Network > Basic Settings > TCP/IP.

Step 2 Set WLAN parameters.

1) Click WLan 1.

2) Optional: Check DHCP. Use SADP tool to obtain the recorder IP address when DHCP is enabled.

If you want to enable DHCP, the network that the device is connected to should support DHCP

(Dynamic Host Configuration Protocol).

3) Enter wireless network IPv4 Address, IPv4 Subnet Mask, IPv4 Default Gateway, and DNS

Server.

4) Click Save.

Step 3 Go to Configuration > Network > Advanced Settings > Wi-Fi.

1) Click Wi-Fi Configuration.

2) Check Enable Wi-Fi.

3) Click Search to search available wireless networks.

4) Select a wireless network in Wireless List.

5) Enter SSID.

6) Select Network Mode as Managed.

7) Select Security Mode and enter Wi-Fi key.

Step 4 Click Save.

Step 5 Optional: Go to Configuration > Network > Advanced Settings > Wi-Fi > Wi-Fi Status to view

Wi-Fi status.

Configure local network parameters.

Step 1 Go to Configuration > Network > Basic Settings > TCP/IP.

Step 2 Click Lan.

Mobile Video Recorder User Manual

Table of Contents