Configure G-Sensor Alarm - HIKVISION AE-MD5043 User Manual

The positioning information will be uploaded according to the set interval.
Step 8 The positioning information will be displayed in the live view and playback mode of the
selected channel.
Step 9 Configure linkage actions.
 If you want the speeding vehicle to trigger the speed alarm, check Trigger Alarm Output.
 If you want the speeding vehicle to trigger the system to beep, check Audible Warning.
Step 10 Click Save.

Configure G-Sensor Alarm

G-Sensor detects and records acceleration information in 3-axial (X, Y, Z) directions.
Before You Start
Connect a G-sensor to the recorder.
Step 1 Go to Configuration > Vehicle > G-Sensor.
Step 2 Select module according to actual situation.
 External: The G-sensor is connected to the device through RS-232/RS-485 interface.
 Built-in: The G-sensor is a built-in module of the device.
Step 3 Set the limit value for acceleration alarm in X, Y and Z directions.
X, Y and Z represent the direction of acceleration and the unit of alarm value is G (G=9.8 m/s
During driving, the recorder will alarm when acceleration of any direction exceeds the set value.
Step 4 Set the linkage actions for acceleration alarm, including Audible Warning and Alarm Output.
Step 5 Click Save.
Mobile Video Recorder User Manual
Figure 6-2 Configure G-Sensor
25
2
).