HIKVISION AE-MH0408 User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. DVR
  5. AE-MH0408
  6. User manual
HIKVISION AE-MH0408 User Manual

HIKVISION AE-MH0408 User Manual

Mobile network video recorder
Hide thumbs Also See for AE-MH0408:
Table of Contents

Advertisement

Quick Links

Download this manual
Mobile Network Video Recorder
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AE-MH0408 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HIKVISION AE-MH0408

Summary of Contents for HIKVISION AE-MH0408

  • Page 1 Mobile Network Video Recorder User Manual...
  • Page 2 MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF...
  • Page 3 Mobile Network Video Recorder User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
  • Page 4 Mobile Network Video Recorder User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text. Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.
  • Page 5 Mobile Network Video Recorder User Manual Safety Instructions  Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.  In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.

  • Page 6: Table Of Contents

    Mobile Network Video Recorder User Manual TABLE OF CONTENTS Chapter 1 Start Up Device ....................1 Startup ................................1 Activation ................................1 Shut Down Device ............................. 2 1.3.1 Enable Scheduled Startup/Shutdown ....................2 1.3.2 Configure Delayed Shutdown ....................... 3 Chapter 2 Network ......................4 Set Local Network .............................
  • Page 7 Mobile Network Video Recorder User Manual Play Video by File ............................37 Chapter 8 Platform ......................39 Mobile Surveillance Platform ........................39 Guarding Vision ............................... 40 Register Device in Guarding Vision platform ....................41 Chapter 9 Backup ......................42 Manual Backup ............................... 42 Format Backup Device ............................
  • Page 8 Mobile Network Video Recorder User Manual 15.2.5 Check a Checkbox ..........................66 15.2.6 Select an Item from a Dropdown List ....................66 Troubleshooting ............................67 Set Areas with Remote Control ........................67 Chapter 16 Appendix ....................... 68 Glossary ................................. 68 FAQ ................................

  • Page 9: Chapter 1 Start Up Device

    Mobile Network Video Recorder User Manual Chapter 1 Start Up Device Startup Before you start:  Install the HDD. Refer to installation guide for details.  Connect the cables and modules correctly. Refer to installation guide for details. Insert the key into the dummy HDD lock. Rotate it clockwise to ON status.

  • Page 10: Shut Down Device

    Mobile Network Video Recorder User Manual STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product.

  • Page 11: Configure Delayed Shutdown

    Mobile Network Video Recorder User Manual Purpose: You can set the shutdown delay time (Vehicle Ignition Startup and Shutdown) for the device. Go to Menu > Basic Settings > Start. Start Control Select Startup/Shutdown Mode as Halt Delay. Select Delay Time. The delay time ranges from 0 to 6 hours. Optionally, check Voltage Protect and select Voltage Limit Percent.

  • Page 12: Chapter 2 Network

    Mobile Network Video Recorder User Manual Chapter 2 Network Set Local Network Go to Menu > Basic Settings > Network. Local Network Settings Enter the device IP Address, Subnet Mask, Default Gateway, and DNS Server Address. Optionally, click Set of More Settings to enable/disable LAN Sharing. LAN Sharing: Enable the function to share 3G/4G network to network interface.

  • Page 13: Set Wi-Fi

    Mobile Network Video Recorder User Manual Dialing Settings Check Enable Dialing. Configure the 3G/4G VPDN (Virtual Private Dialup Network) settings. Please consult the local operator for the network parameters of the VPDN. 1) Click Set of More Settings. 2) Select Bearing Mode. 3) Enter APN (Access Point Name), Dial Number, User Name, and Password.
  • Page 14 Mobile Network Video Recorder User Manual Wi-Fi Settings Check Enable Wi-Fi. Select the Configuration file. 5 configuration files are available and only one SSID can be set for each file. Set network SSID (Service Set Identifier), and select the Connection Mode, Security Type (WEP, WPA2-PSK or WPA-PSK), Encryption Type (TKP, AES or auto), and enter the Key if necessary.

  • Page 15: Set Wi-Fi Ap

    Mobile Network Video Recorder User Manual IP & DNS Settings for Wi-Fi Click OK. Optionally, go to Menu > Status > Wi-Fi to view the Wi-Fi status. Wi-Fi Status Interface Purpose:...
  • Page 16 Mobile Network Video Recorder User Manual Configure Wi-Fi access point settings. Go to Menu > Basic Settings > Wi-Fi. Wi-Fi Settings Click Set of Wi-Fi AP Wi-Fi Access Point Settings Check Enable Wi-Fi AP and edit other parameters as required.

  • Page 17: Security

    Mobile Network Video Recorder User Manual  Enable Wi-Fi AP: Once enabled, the device can work as a wireless router.  Enable Wi-Fi Broadcast: Once enabled, other devices are able to detect the SSID of the device.  Enable Wi-Fi Hotspot: Enable it to share the device’s internet connection. Other devices can access to internet via joining the hotspot.
  • Page 18 Mobile Network Video Recorder User Manual Click Add. Enter the trusted IP address and click OK. Add IP Address Step result: the trusted IP address will be added on the white list. The configured whitelist will be cleared after rebooting the device.

  • Page 19: Chapter 3 Camera Management

    Mobile Network Video Recorder User Manual Chapter 3 Camera Management Basic Image Settings Purpose: Configure the camera name, OSD (On Screen Display) settings, etc. Go to Menu > Other Settings > OSD. Camera Settings Select Camera to configure. Edit parameters. Optionally, select the camera in the dropdown list Copy to and click Copy to copy the current settings to the selected camera.

  • Page 20: Set Privacy Mask

    Mobile Network Video Recorder User Manual Advanced Settings Click Set of Image Settings. Image Settings Edit the parameters. Click OK in advanced settings interface. Click OK in camera settings interface. Set Privacy Mask Purpose: The privacy mask can be used to protect personal privacy by concealing parts of the image from view or recording with a masked area.

  • Page 21: Set Mirror Type

    Mobile Network Video Recorder User Manual Advanced Settings Click Set of More Setting. Check Private Mask. Click Area Settings of Private Mask. Draw areas. Right click and select Exit. Click OK in Advanced settings interface. Click OK in Camera settings interface. Set Mirror Type Purpose: Set the mirror type of the image as left/right, up/down, or center.

  • Page 22: Ip Camera Management

    Mobile Network Video Recorder User Manual Advanced Settings Click Set of More Setting. Select Mirror Type as required. Click OK in Advanced settings interface. Click OK in Camera settings interface. IP Camera Management Purpose: Add IP cameras to the device. You can get the live view, record the video, and set the parameters of the connected IP camera.
  • Page 23 Mobile Network Video Recorder User Manual IPC Settings Select an inactivated IP camera. Click Quickly Activate. The IP camera password will be set as the same with the device password. Manual Activation Go to Menu > Other Settings > Camera Settings> IP Camera > Set. IPC Settings Select an inactivated IP camera.

  • Page 24: Add Ip Camera

    Mobile Network Video Recorder User Manual Click Manually Activate. Activate IP Camera Manually Enter the same password in New Password and Confirm. STRONG PASSWORD RECOMMENDED – We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product.
  • Page 25 Mobile Network Video Recorder User Manual Make sure the IP camera password is the same with the device. Go to Menu > Other Settings > Camera Settings> IP Camera > Set. Select an online IP camera. Click Quickly Add. Quick Add ...
  • Page 26 Mobile Network Video Recorder User Manual Manual Add Edit Protocol Purpose: To connect the network cameras which are not configured with the standard protocols, you can configure the customized protocols for them. The system provides 16 customized protocols. Go to Menu > Other Settings > Camera Settings> IP Camera > Set. Click Manually Add.

  • Page 27: Edit Ip Camera

    Mobile Network Video Recorder User Manual Protocol Edit parameters as required. Click OK Select an added IP camera and click Edit. Edit the parameters. Enter Password. The password must be correct. Click OK.

  • Page 28: Delete Ip Camera

    Mobile Network Video Recorder User Manual Edit IP Camera Select an IP camera and click Delete. Click Yes on the pop-up dialog box. Delete IP Camera...

  • Page 29: Chapter 4 Live View

    Mobile Network Video Recorder User Manual Chapter 4 Live View Preview Settings Purpose: Configure the dwell time of live view, set the camera order, enable/disable the audio preview, etc. Go to Menu > Other Settings > Preview. Preview Settings Select the Video Output according to the actual needs. Configure the Preview Mode, Dwell Time, and Enable Audio Output.
  • Page 30 Mobile Network Video Recorder User Manual Preview Settings Configure Preview Mode. We take the example of preview mode is 1+1 to demonstrate the following steps. Click Set of Camera Order. Click of window-1 to select the camera to display. Click of window-2 to select the camera to display.

  • Page 31: Right-Click Menu

    Mobile Network Video Recorder User Manual Camera Order (1+1 Preview Mode) Click OK in Preview Settings interface. Right-Click Menu Purpose: In live view, right click to pop up right-click menu. Right-Click Menu Item Description Item Description Menu Enter the main menu of the system by right clicking the mouse. Multi-Screen Adjust the screen layout by choosing from the dropdown list.

  • Page 32: Ptz Operation

    Mobile Network Video Recorder User Manual Playback Enter the playback interface and start playing back the video of the selected channel immediately. Click to pop up PTZ control panel. IPC Settings Click to enter network camera adding interface. PTZ Operation Purpose: Follow the procedure to set the parameters for PTZ.
  • Page 33 Mobile Network Video Recorder User Manual PTZ Control Panel Description of PTZ Control Panel Icon Description Icon Description Icon Description Direction buttons and the Zoom+, Focus+, Zoom-, Focus-, auto-cycle Iris+ Iris- button Moving speed Light on/off Wiper on/off...

  • Page 34: Chapter 5 Storage

    Mobile Network Video Recorder User Manual Chapter 5 Storage Storage Settings Purpose: A newly installed hard disk drive (HDD) must be initialized before it can be used. Go to Menu > Storage. Storage Management Check the HDD to format. Click Format. Purpose: The overwrite function is enabled by default.

  • Page 35: Configure Picture Partition

    Mobile Network Video Recorder User Manual Storage Management Select Overwrite as Yes or No. Click OK. Purpose: Specify the percentage of picture partition among the whole storage capacity. You can start capturing in EHome platform. Go to Menu > Storage.

  • Page 36: View S.m.a.r.t. Information

    Mobile Network Video Recorder User Manual Storage Management Enter Picture Partition. Click Yes on popup message box to format HDD. Click OK to confirm the operation. Click OK. Purpose: The S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system for HDD to detect and report on various indicators of reliability in the hopes of anticipating failures.

  • Page 37: Recording Settings

    Mobile Network Video Recorder User Manual Storage Management Select an HDD. Click S.M.A.R.T. Info. S.M.A.R.T. Information Recording Settings Purpose:...
  • Page 38 Mobile Network Video Recorder User Manual Configure the transmission stream type, the resolution, frame rate, etc. Go to Menu > Basic Settings > Record. Record Settings Select Camera. Configure the image parameters.  Encoding Parameters  Main Stream (Normal): Used for continuous recording. ...

  • Page 39: Configure Alarm Triggered Recording

    Mobile Network Video Recorder User Manual Select the fixed value provided by the system or customize the maximum bitrate as desired. Edit recording schedule. For details, refer to 5.2.3 Configure Schedule. Click Set of More Settings to configure the pre-record and post-record time. ...

  • Page 40: Configure Schedule

    Mobile Network Video Recorder User Manual Go to Menu > Basic Settings > Record. Click Set of Schedule. Check Enable Schedule. Select the day from the dropdown list for settings. Configure all day schedule or custom schedule.  Check All Day to enable all-day recording, and then select the recording type from the drop-down list.

  • Page 41: Sensor-In Settings

    Mobile Network Video Recorder User Manual  5 recording types are available: Normal, Motion Detection, Alarm, Motion|Alarm, and Motion&Alarm.  Up to 8 time periods can be set for each day and each of the time periods cannot be overlapped. Record Schedule Settings Sensor-in Settings Purpose:...
  • Page 42 Mobile Network Video Recorder User Manual Sensor-In Settings Check Enable Set Triggering Level and Pop Channel for sensor-in. Click OK.

  • Page 43: Chapter 6 Mobile Device Features

    Mobile Network Video Recorder User Manual Chapter 6 Mobile Device Features Configure Satellite Positioning Purpose: The built-in GNSS module supports GPS (Global Positioning System), enabling device positioning and speed limit alarm. Go to Menu > Basic Settings > Positioning. Positioning Select Positioning Module.

  • Page 44: Configure G-Sensor Alarm

    Mobile Network Video Recorder User Manual Configure G-Sensor Alarm Purpose: G-Sensor detects and records acceleration information in 3-axial (X, Y, Z) directions. Before you start: Connect an external sensor to the device for obtaining and providing the acceleration speed in 3-axial directions. Go to Menu >...

  • Page 45: Chapter 7 Playback

    Mobile Network Video Recorder User Manual Chapter 7 Playback Instant Playback Purpose: You can search and play back the record files stored on the device instantly. Go to Menu > Video Search. Video Search Select Search Mode as General. Only the general video supports instant playback. General: Normal videos.
  • Page 46 Mobile Network Video Recorder User Manual Video Search Select Search Mode.  General: Normal videos.  Event: Motion detection, alarm, motion│alarm, and motion&alarm videos. Select Camera. Select Video Type. Specify Start Time and End Time. Click Search. The matched videos will be displayed. Search Result Select a video and click Play.

  • Page 47: Chapter 8 Platform

    Mobile Network Video Recorder User Manual Chapter 8 Platform Mobile Surveillance Platform Purpose: The device can be remotely accessed via mobile surveillance platform. For details of platform configuration, you can refer to platform user manual. When your device and mobile surveillance platform are not in the same network segment, network priority: 3G/4G network >...

  • Page 48: Guarding Vision

    You can download mobile surveillance platform to your computer by visiting our official website and going to Home > VMS > Support > Download > iVMS-5200 Mobile Surveillance. Official website: http://www.hikvision.com/en/ You can download iVMS-5260M to your mobile phone by search it in app store/google play or scan QR code below.

  • Page 49: Register Device In Guarding Vision Platform

    Mobile Network Video Recorder User Manual Platform Settings Check Enable Platform. Select Platform as Guarding Vision. Click OK and reboot the device to activate the new settings. Optionally, go to Menu > Status > Platform to view the platform status. Register Device in Guarding Vision platform Access Guarding Vision platform.

  • Page 50: Chapter 9 Backup

    Mobile Network Video Recorder User Manual Chapter 9 Backup Manual Backup Purpose: Back up the videos stored on the device. Go to Menu > Video Search. Video Search Select Search Mode.  General: Normal videos.  Event: Motion detection, alarm, motion│alarm, motion&alarm videos. Select Camera.

  • Page 51: Format Backup Device

    Mobile Network Video Recorder User Manual Search Result Select the videos and click Export. Format Backup Device Purpose: View the status and the free space/capacity of the connected backup device. And you can also format the backup device. Go to Menu > Maintenance > Storage. Backup Device Select Backup Device.

  • Page 52: Chapter 10 Events And Alarms

    Mobile Network Video Recorder User Manual Chapter 10 Events and Alarms Configure Alarm Input Purpose: Configure the settings for alarm input, including trigger level, arming schedule and alarm linkage actions, etc. Go to Menu > Other Settings > Alarm In. Alarm Input Settings Select Alarm Input No.

  • Page 53: Configure Alarm Output

    Mobile Network Video Recorder User Manual Configure Alarm Output Purpose: Configure the arming schedule, alarm duration time and alarm name for alarm output. Go to Menu > Other Settings > Alarm Out. Alarm Output Settings Select Alarm Output No. Enter Alarm Name. Select Dwell Time.

  • Page 54: Configure Exception Alarm

    Mobile Network Video Recorder User Manual Alarm Terminal Check Enable Alarm Terminal. Edit Terminal Name. Click the Set of Triggered Camera to set the alarm triggered recording channel. Click OK. Configure Exception Alarm Purpose: Configure alarms which are triggered by exceptions to take necessary actions in time. Go to Menu >...

  • Page 55: Configure Alarming Schedule And Linkage Actions

    Mobile Network Video Recorder User Manual Select Exception Type and set corresponding alarm linkage actions, including audible warning and alarm output. Click OK. Exception types include:  HDD Full: The HDD is full.  HDD Error: Writing HDD error, unformatted HDD, etc. ...
  • Page 56 Mobile Network Video Recorder User Manual Linkage Action Click Set of Linkage Action Linkage Action  Full Screen Monitoring When an alarm is triggered, the local monitor displays the video image from the alarming channel configured for full screen monitoring. ...

  • Page 57: Configure Detection Area

    Mobile Network Video Recorder User Manual  Trigger Alarm Output Trigger an alarm output when an alarm is detected. Click OK. Configure Detection Area Click Area Settings. Drag to draw detection area. Optionally, right click to delete areas or set detection sensitivity. Right click and select Exit.

  • Page 58: Chapter 11 User Account Management

    Mobile Network Video Recorder User Manual Chapter 11 User Account Management Add User Purpose: Add and delete users, and modify the password and permission of users. Go to Menu > Other Settings > User. User Management Click Add. Add User Enter User Name and Password and enter the same password in Confirm.

  • Page 59: Delete User

    Mobile Network Video Recorder User Manual  Guest: The Guest has permissions for Preview, Playback, Backup and Log Search. Click OK. Delete User Go to Menu > Other Settings > User. Select a user and click Delete. Click Yes in confirmation message box. Modify User Go to Menu >...

  • Page 60: Chapter 12 General System Configuration

    Mobile Network Video Recorder User Manual Chapter 12 General System Configuration Configure Basic Display Settings Purpose: Set system time, select CVBS output standard, enable password and configure DST settings, etc. Go to Menu > Other Settings > Display. The system language is set as English by default and is not editable. Display Settings Edit parameters as required.

  • Page 61: Configure Ntp

    Mobile Network Video Recorder User Manual DST Settings Check Enable DST. Set the start time and end time for DST. Select DST bias. Click OK in DST settings interface. Click OK in Display Settings. Configure NTP Go to Menu > Basic Settings > Network. Click Set of More Settings.

  • Page 62: Configure Advanced Display Settings

    Mobile Network Video Recorder User Manual Enter the IP address of NTP Server. Click OK in NTP settings interface. Click OK in network settings interface. Configure Advanced Display Settings Purpose: Set the system time, select the CVBS output standard, enable the password, configure the DST settings, etc.

  • Page 63: Chapter 13 Maintenance

    Mobile Network Video Recorder User Manual Chapter 13 Maintenance Check Status Go to Menu > Status to view status of recording, 3G/4G, platform, satellite positioning, G- Sensor, alarm, and Wi-Fi. Status View System Information Go to Menu > Maintenance > Information to view the device name, model, serial No., firmware version, encoding version, and panel version.

  • Page 64: Upgrade The System

    Mobile Network Video Recorder User Manual Upgrade the System Purpose: The device can be upgraded either through local USB flash disk or remote FTP server. Before you start:  Connect the USB device that contains the upgrade firmware.  The upgrade firmware should be stored in the root directory of the USB device. Go to Menu >...

  • Page 65: Log Operation

    Mobile Network Video Recorder User Manual Go to Menu > Maintenance > Upgrade. Upgrade Select Upgrade Type as FTP Upgrade. Enter FTP Server Address. Click Upgrade to start upgrading and reboot the device to activate the new settings. Log Operation Purpose: The operation, alarm, exception and information of the device can be stored in log files, which can be viewed and exported at any time.

  • Page 66: Export Log File

    Mobile Network Video Recorder User Manual Purpose: The operation, alarm, exception and information of the device can be stored in log files, which can be viewed and exported at any time. Before you start: Connect a backup device to the device. Go to Menu >...

  • Page 67: Import/Export Configuration File

    Mobile Network Video Recorder User Manual  Factory: Restore all parameters to the factory default settings. Click OK. Click Yes in confirmation message box. Import/Export Configuration File Purpose: The configuration files can be imported to multiple device devices if they are to be configured with the same parameters.

  • Page 68: Serial Port Settings

    Mobile Network Video Recorder User Manual Import/Export Configuration Files Click Export. Serial Port Settings Purpose: Two types of serial ports are provided: RS-232 and RS-485. The RS-232 port can be used in two ways:  Parameters Configuration: Connect a PC to the device through the PC serial port. Device parameters can be configured by using software such as HyperTerminal.

  • Page 69: Reboot

    Mobile Network Video Recorder User Manual Serial Port Settings Edit parameters as required. Click OK. Reboot Go to Menu > Maintenance. Click Reboot and click Yes on confirmation message box to reboot the device. Reboot...

  • Page 70: Chapter 14 Shut Down Device

    Mobile Network Video Recorder User Manual Chapter 14 Shut Down Device Enable Scheduled Startup/Shutdown Purpose: Set the scheduled startup/shutdown. The device will automatically start up/shut down according the schedule. Go to Menu > Basic Settings > Startup. Select Startup/Shutdown Mode as Scheduled Startup/Shutdown. Scheduled Startup/Shutdown Select the Date to set the schedule.
  • Page 71 Mobile Network Video Recorder User Manual Start Control Select Startup/Shutdown Mode as Halt Delay. Select Delay Time. The delay time ranges from 0 to 6 hours. Optionally, check Voltage Protect and select Voltage Limit Percent. If the voltage of the device reaches the selected threshold, the device will shut down automatically.

  • Page 72: Chapter 15 Remote Control

    Chapter 15 Remote Control Purpose: The device can be controlled via IR remote control and mouse. Buttons Description Before you start: Batteries (2×AAA) must be installed before operation. Remote Control Description of the IR Remote Control Buttons Name Description Power Reserved.

  • Page 73: Operation Introduction

    Network Video Recorder Quick Start Guide  Enter the edit status, and then delete the character in the front of the cursor. Edit  Check a checkbox.  Clip videos In Playback mode. Switch the input method when editing text field. Reserved.

  • Page 74: Build Connection With Device (Device No. Is Not 255)

    Network Video Recorder Quick Start Guide Purpose: If the device number default one (255), press DEV to build connection between remote control and device. Purpose: Follow the steps to build connection between remote control and device when device number is not 255.

  • Page 75: Troubleshooting

    Network Video Recorder Quick Start Guide Press Enter to select it. Troubleshooting Purpose: If there is no response after you press any button on the remote, follow the procedure below to troubleshoot. Go to Menu > Other Settings > Display Click Set of Advanced Settings.

  • Page 76: Chapter 16 Appendix

    Network Video Recorder Quick Start Guide Chapter 16 Appendix Glossary  3G/4G: 3G/4G refers to the 3rd/4th-generation telecommunication technology which is the high speed transmission of the cell data. The 3G/4G service can transmit sound and other data simultaneously and the bitrate is up to hundreds kbps. ...

  • Page 77: Faq

    Network Video Recorder Quick Start Guide  Wi-Fi: Wi-Fi is a mechanism of the wireless connecting electronic devices. A device enabled with Wi-Fi such as PC, video game console, can connect to the internet via a wireless network access point. •...
  • Page 78 Network Video Recorder Quick Start Guide The parameters (e.g., server IP, device registered ID, etc.) of the platform are configured incorrectly. The platform works abnormally. • Fail to obtain satellite positioning information. Possible reasons: The satellite positioning antenna is not placed outdoor. There is no satellite positioning module (built-in or external) available for the device.
  • Page 79 UD10021B...

Table of Contents