Subscribe to Our Youtube Channel
Related Manuals for Ecler VEO-XPS43
Summary of Contents for Ecler VEO-XPS43
- Page 1 VEO-XPS43 HDMI EXTENDERS 4K Single Cat.6 Extender Kit USER MANUAL 50-0427-0100 VEO-XPS43 EN...
-
Page 2: Table Of Contents
INDEX IMPORTANT REMARK......................3 IMPORTANT SAFETY INSTRUCTIONS ................3 IMPORTANT NOTE ........................5 INTRODUCTION ........................5 4.1. Main Features ..........................5 PACKAGES CONTENT......................6 PANELS DESCRIPTION ......................6 6.1. Transmitter Front and Rear Panel ..................6 6.2. Receiver Front and Rear Panel ....................7 DEVICE CONNECTIONS ...................... -
Page 3: Important Remark
IMPORTANT REMARK The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. - Page 4 9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.
-
Page 5: Important Note
Ecler VEO-XPS43 comes with a 3-year warranty. INTRODUCTION The Ecler VEO-XPS43 is a professional HDMI extender kit that allows to extend Ultra High Definition Audio and Video signals over a single Cat. 6 cable up to 30m of distance and FullHD signals up to 60m with zero-latency. VEO-XPS43 includes EDID management features and it supports IR pass through, for seamless integration. -
Page 6: Packages Content
EDID to the source. 3. HDMI OUT CONNECTOR: Connect this output to a local display or use it for daisy chaining another VEO-XPS43 transmitter. 4. IR OUT CONNECTOR: Connect it to the included IR Blaster for extending an IR signal from the display to the source. -
Page 7: Receiver Front And Rear Panel
6. CAT CONNECTOR: Connect it to the receiver input port using a CAT. 6 cable. Only point-to-point connections are allowed. 7. CONNECTION LED: This LED indicates the state of the HDMI connection: o Light on: HDMI signal with HDCP. o Light flashing: HDMI signal without HDCP. o Light off: No HDMI signal audio output. -
Page 8: Device Connections
DEVICE CONNECTIONS Good quality standard Ethernet Cat. 6 cables (or superior) are required to connect transmitter and receiver in order to avoid connection issues and malfunctioning. Shielded cables and shielded connectors are mandatory to ensure a good ground signal reference to the receiver and avoid electromagnetic interferences along the cable. -
Page 9: Mechanical Diagram
MECHANICAL DIAGRAM 8.1. Transmitter 8.2. Receiver... -
Page 10: Technical Specifications
Selector Switch Pass-through 3.5mm Minijack connector General HDMI Distance up to 10 meters / 33 ft with Ecler VEO cables Cat.6 Distance CAT6a/7 @4K up to 30m / up to 98ft CAT6a/7 @1080p up to 60m / up to 197ft... - Page 11 NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications. For technical queries contact your supplier, distributor or complete the contact form on our website, Support / Technical requests. Motors, 166‐168 08038 Barcelona ‐ Spain ‐ (+34) 932238403 | information@ecler.com www.ecler.com...
Need help?
Do you have a question about the VEO-XPS43 and is the answer not in the manual?
Questions and answers