INDEX IMPORTANT REMARK ......................3 IMPORTANT SAFETY INSTRUCTIONS ................3 IMPORTANT NOTE ........................ 5 INTRODUCTION ........................5 PACKAGE CONTENTS ......................6 PANEL DESCRIPTION ......................6 6.1. Transmitter Front and Rear Panel ..................6 6.2. Receiver Front and Rear Panel....................7 CONNECTION AND INSTALLATION .................
1. IMPORTANT REMARK The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Page 4
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The VEO-XPT44 comes with a 3-year warranty. 4. INTRODUCTION Ecler VEO-XPT44 is a professional HDBaseT transmitter/receiver kit for HDMI 2.0a extension of High Dynamic Range (HDR) formats. It supports video signal at resolution up to 4K/UHD at 60Hz with 4:4:4 chroma sampling and any other HDMI data rate up to 18Gbps.
5. PACKAGE CONTENTS 1 x Transmitter Unit 1 x Receiver Unit 1 x 24V DC International Power Supply (One PSU for both units) 1 x IR Blaster unit 1 x IR Receiver unit 2 x Phoenix plugs for RS-232 cable termination 6.
6.2. Receiver Front and Rear Panel 1. HDMI Out1 Port 2. HDMI Out2 Port 3. IR Transmitter Port 4. IR Receiver Port 5. 24V DC Plug Connector 6. USB port (Reserved for firmware update) 7. CAT5e/6/7 Input 8. RS-232 Port 7.
5. Phoenix RS-232 ports can be connected to DTE-DCE devices for pass-through RS-232 transmission. 6. Connect 24V DC power supply to VEO-XPT44 Transmitter. 8. APPLICATION DIAGRAM...
Page 10
HDMI Distance up to 10 meters / 33 ft with Ecler VEO cables Operating Temperature -10 to +50°C (14 to +122 °F) Humidity 5 to 90 % RH (no condensation) Power Consumption 12W (Max, TX+RX) Power Supply AC100~240V 50/60Hz Output: DC 24VDC 1A Dimensions H x W x D 140mm ×...
Page 11
NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications. Motors, 166‐168 08038 Barcelona ‐ Spain ‐ (+34) 932238403 | information@ecler.com www.ecler.com...