Salicru ILUEST NE Series User And Operating Manual page 12

Voltage dimmer-stabilizer
Table of Contents

Advertisement

Available languages

Available languages

3.2.2.- Structural diagram.
The flow dimmer-stabilizers, ILUEST series, are manufactured with Booster transformer (Fig.2).
Input
Input
Input
Input
Input
3.3.- System description.
3.3.1.- Introduction.
The new range of voltage dimmer-stabilizers ILUEST series operates, both in the voltage power supply stabilization of the lights,
and in the light flow dimming during the period of lower light demands.
Thanks to its design, the voltage supplies the lights is always inside the range ±2 % of the nominal value, therefore it allows to
operate, the lights and auxiliary equipment in the foreseen conditions, by obtaining the optimal flow and light levels.
Advantge, nothing worthless, is to consider the lamp lifetime because, as it is kown, the night overvoltages are one of the main
causes of the lamp premature exhaustion. Indeed, on one hand, a stable voltage increases the discharge lamp lifetime, and if
the overvoltages are eliminated, there is an additional performance, which is to reduce the consumption because the absorbed
power is maintained to its nominal value (a 10% overvoltage increases the power consumption in more than 20 % and reduces
the lamp lifetime in 50%). On the other hand, dimming the power supply voltage to preset values, allow maintaning the light level
according to the needs in such periods that the visual demands are lower.
3.3.2.- Constructive features.
The ILUEST is based in the well-kown and accredited voltage stabilizer "RE2" series, which has been manufactured for more
than thirty years and they have been improved with the last and new technologies, to assure its high reliability and efficiency.
The main constructive parts are (see fig.2):
«Booster» transformer
Multi-tap transformer Automatic
Solid state static switches
C R
FA
C
REF
Fig. 2. ILUEST with booster single line diagram.
Automatic
By-pass
Soft starts
control
CAD
Output
control
Comunicación
serie
RS-485
- 12 -
Manual
By-pass
Output
(Optional)
Remote
control
terminals
ON/OFF saving
Optional
programmer

Advertisement

Table of Contents
loading

Table of Contents