Igniter Installation - Wolf CG365P/S Manual

Hide thumbs Also See for CG365P/S:
Table of Contents

Advertisement

Remove the Burner Grate
Lift the burner grate from the unit.
Remove the Burner Cap
Remove the burner cap from the burner assembly.
Remove the Burner Assembly
1
Use a T-15 Torx bit to remove the screws holding the burner
assembly to the orifice holder.
2
Lift the burner assembly from the burner pan.
3
Remove the electrode wire from the igniter.
828389 REV. A
06/2018
CG Contemporary Gas Cooktop Service Manual
4
Remove the burner assembly from the unit.
Remove the Igniter
1
Use a Phillips screwdriver to remove the screw from the
underside of the burner assembly.
2
Remove the igniter from the burner assembly.

IGNITER INSTALLATION

Install the Igniter
1
Install the igniter into the burner assembly.
2
Use a Phillips screwdriver to install the screw into the
underside of the burner assembly.
Install the Burner Assembly
1
Attach the electrode wire to the igniter.
2
Place the burner assembly into the burner pan.
3
Use a T-15 Torx bit to install the screws holding the burner
assembly to the orifice holder, torqued to 24 in lb.
9
service.subzero.com
Burner Cap
Burner Assembly
Igniter
Electrode Wire

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents