Installation Information - Wolf CT30I/S Instructions Manual

Installation Information

INSTALLATION DIMENSIONS FOR CT15I
(Refer to Illustrations to the right & below)
This cooktop is designed to fit a standard 24" (610 mm)
width base cabinet with a 25" (635 mm) deep counter
top. Before making the counter top cut-out, verify that
the cooktop will clear the side walls of the base cabinet
below. There should be at least 6" (152mm) clearance
between the top counter top surface and any com-
bustible surface directly below the unit. This includes
upper edges of drawers located directly below unit. If a
shelf is installed below the unit, a 1" (25mm) gap at the
rear of the cabinet shelf is necessary to allow for proper
ventilation. Failure to do so could result in decreased
performance or product damage.
NOTES:
• Locate junction box within reach of 48"(1219 mm)
conduit, so it is accessible when the cooktop is installed.
• Plastic or other utensils with low melting temperatures should not be located in drawers directly below unit.
13" max
(330)
19-1/4" (489)
2"**
COOKTOP
(51)
CUT-OUT
DEPTH
NOTES:
• Application shown allows for installation of two 15"(381mm) modules side-by-side with 33"(838mm) recommend-
ed cabinet width. 18"(457mm) recommended cabinet width for installation of single 15"(381mm) cooktop or mod-
ule. *Minimum clearance from both side edges of cooktop cut-out to combustible materials up to 18"(457mm)
above countertop. **Minimum clearance from rear edge of cooktop cut-out to combustible materials up to
18"(457mm) above countertop.
• If cooktop is to be used with any combination of additional cooktops or modules with a filler strip, the cut-out
width increases to 14"(356mm).
• Unit dimensions may vary to ± 1/8" (3mm).
#821684 - Revision B - March, 2013
Induction Cooktop (CTI) Series
Induction Cooktop (CTI) Series
:
2"* min (51)
18"
CUT-OUT TO
(457)
COMBUSTIBLE
MATERIALS
2-1/2" min
BOTH SIDES
(64)
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
2-4
13-3/8" (340)
COOKTOP CUT-OUT
WIDTH
2-1/2" MIN
(64)
FRONT OF COUNTERTOP
Overhead View of Countertop.
33" (838) RECOMMENDED
CABINET WIDTH
13-3/8" (340)
CUT-OUT
WIDTH
4-1/2" (114)
E
15"
(381)
15"
(381)
19-1/4" (489)
COOKTOP
CUT-OUT DEPTH
30" (762)
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
ABOVE COOKTOP