Wolf CG365P/S Manual page 24

Remove All Burner Caps
Remove all burner caps from the burner assemblies.
Remove All Knobs
Pull all of the knobs away from the unit.
Remove All Bezels
To remove each bezel:
3
Use a / " socket to remove the bezel from the unit.
4
828389 REV. A 06/2018
CG Contemporary Gas Cooktop Service Manual
Remove the Light Module
1 Pull the light module forward out of the receptacle.
2 Disconnect the AC-DC rectifier wire connector from the light
module.
Uninstall the Unit
Remove the unit from the installation.
Remove the Receptacle
1 Use a Phillips screwdriver to remove the screws from the
receptacle.
2 Remove the receptacle from the burner valve.
TIP: The spacer(s) typically remain attached to the receptacle.
Remove the Burner Valve
1 Remove the black wire from the normally-open (NO)
terminal.
2 Remove the red wire from the common (C) terminal.
3 Use a
burner tube.
23
5
/ " combination wrench to remove the simmer
16
service.subzero.com