Advertisement
Advertisement
Table of Contents
Related Manuals for FOS Technologies FOS GLOW II
Summary of Contents for FOS Technologies FOS GLOW II
- Page 1 FOS GLOW II L005456 User Manual PLEASE KEEP THIS MANUAL FOR FUTURE NEEDS...
- Page 2 1. Unpacking Thank you for choosing our products. For your own safety, please read this manual before installing the device. This manual covers the important information on installation and applications. Please install and operate the fixture with following instructions, make sure the power is off before opening the light or repairing.
- Page 3 2. Safety Instructions This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. If the device has been exposed to temperature changes due to environmental changes, do not switch it on immediately.
- Page 4 3. Key Features Voltage: AC110-240V 50/60Hz Max Power: 80w Source: 8x3w led warm white, 8x3w led red laser,638nm_500mw LED working lifetime:50000 hours Color temperature: 3200k Channel: 23 channels Laser Pattern: Various Thick Beam Effect Patterns Control mode: DMX-512 signal control, self-propelled mode, sound control mode.
- Page 5 4. Operation Instructions -The moving head is for laser purpose. -Don’t turn on the fixture if it’s been through severe temperature difference like after transportation because it might damage the light due to the environment changes. So make sure to operate the fixture until it is in normal temperature.
- Page 6 5. Display menu control ADDR A001-A512 address code SLND MAST, SLAV SHND SOUD, AUTO voice control, selections MANU LASER1-LASER8,STROBE, manual test SENS voice control sensitivity (0 off, 100 most sensitive) LED ON, OFF background light switch TEST automatic test VER V100 software version number 6.DMX Channels 23Channel Mode Function...
- Page 7 128-255 open LED7 0-127 close 128-255 open LED8 0-127 close 128-255 open laser1 0-127 close 128-255 open Laser2 0-127 close 128-255 open Laser3 0-127 close 128-255 open Laser4 0-127 close 128-255 open Laser5 0-127 close 128-255 open Laser6 0-127 close 128-255 open Laser7...
- Page 8 7. Maintenance and Cleaning The following points have to be considered during the inspection: 1. All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded. 2. There must not be any deformations on the housing, color lenses, fixations and installation spots (ceiling, suspension, trussing).
Need help?
Do you have a question about the FOS GLOW II and is the answer not in the manual?
Questions and answers