Preparing For Use; Unpacking The Instrument; Connecting To Power; Connecting To A Vehicle Dc Power Supply Via Cigarette Lighter - R&S TSMA6B-BP Manual

®
R&S TSMA6B-BP
3

Preparing for use

Here, you can find basic information about setting up the product for the first time.
3.1

Unpacking the instrument

1. Unpack the product carefully.
2. Retain the original packing material. Use it when transporting or shipping the
product later.
3. Using the delivery notes, check the equipment for completeness.
4. Check the equipment for damage.
If the delivery is incomplete or equipment is damaged, contact
Rohde & Schwarz.
3.2

Connecting to power

This section describes how to connect the R&S TSMA6B-BP to a power supply
unit.
You connect the R&S TSMA6B-BP to a power supply unit to recharge the batter-
ies. For details, see
on page 13.
3.2.1 Connecting to a vehicle DC power supply via cigarette
lighter
The R&S TSMA6B-BP is delivered with a 12 V DC power supply cable with a cig-
arette lighter connector.
1. Check the rating of the vehicle DC power supply. It has to be 12 V.
2. Connect the 7-pin connector to DC IN.
Manual 4900.9099.02 ─ 02
Chapter 3.4, "Charging the batteries for the first
Preparing for use
Connecting to power
time",
10