Monitoring The Battery Charge Status; Checking The Charge Status Of The Individual Battery - R&S TSMA6B-BP Manual

®
R&S TSMA6B-BP
6.4

Monitoring the battery charge status

You can monitor the battery charge status in several ways.
6.4.1

Checking the charge status of the individual battery

You can check the charging state of the individual battery. If you check one bat-
tery at a time, you can check the battery charge status during a measurement
without connected DC power supply. If an external DC power supply is connected
or if the batteries are being charged without connected devices, you can remove
both batteries at the same time.
Figure 6-1: R&S MNT-BP99WH
1 = LED segment display
To check the charge status
1. Remove the battery from the bay (see
the batteries",
2. On the battery (see
play.
Manual 4900.9099.02 ─ 02
on page 12).
Figure 6-2), press the button below the LED segment dis-
Operating the battery pack
Monitoring the battery charge status
Chapter 3.3, "Inserting and removing
22